Looking for a specific part?
Siemens
Range: 0.25 to 5 m (0.8 to 16.4 ft). Process temperature: -40 to 60°C (-40 to 140°F). Output: One relay, 4 to 20 mA (3-wire) or 4 to 20 mA (2-wire).
Range: 245mm (10"). Process Temperature: -40 to +150°C (-40 to +302°F)
HydroRanger 200 HMI is an ultrasonic level controller for up to six pumps and provides control, differential control, and open channel flow monitoring
MultiRanger 200 HMI is a versatile short to medium-range ultrasonic single and multi-vessel level monitor/controller for virtually any application in a wide range of industries.
Supply pressure 500 psig Maximum. Sensitivity less than 1/8' Water Column. Adjustment range 1-50"H20 to 15-450 psig. Pipe Size 1/8' NPT - 1/2' NPT/BSPT.
Maximum Output Pressure 3-15psig. Maximum Supply Pressure 100 psig. Flow Capacity 10 SCFM Ratio 1:1 Pipe size 1/4 "
Output Range 0-120 psig Maximum Supply Pressure 150 psig Sensitivity 1” (2.5 cm) of water Air Consumption Less than 5 SCFM (0.17 m3/hr)
Recommended Flow for Optimum Efficiency 1 0.5 scfm at 75 psig Maximum Supply Pressure 1000 psig (69 bar) Pressure Droop Through Filter with 75 psig Supply Pressure and 0.5 scfm flow approximately 1/4 psi (2 kPa) Materials of Construction Brass, lamb's wool, and neoprene.
Maximum supply pressure 80 or 150 psig. Repeatability 1% Adjustment range 2' W.C.-10 to 2.0-120. Inlet and Outlet 1/4"
Instrument Input Pressure Range...................3-15, 3-9, 9-15, and 3-27 psig Supply Pressure Minimum..3 psi above required actuator pressure Maximum 100 psi Air Consumption .0.25 SCFM (in balance condition with 20 psi supply and 9 psi dead ended output) Valve Travel Minimum 1/4" Maximum 4"
Input Ranges 3-15, 3-9, 3-27, 0-15, and 0-30 psig including split Valve-Stroke Ranges 1/4" minimum -48" maximum Supply Pressure 3 psig min above full actuator pressure minimum 150 psig maximum
Input Signal 760P: 3-15 psig, 3-27 psig, 50% split range 760E: 4-20 mA, 50% split range FM Approvals: Intrinsically Safe: Class I, Division 1, Groups A, B, C, D, Class II, Division 1, Groups E, F and G Class III, Division 1 Span Adjustable –60% to +25% of normal span
Supply Pressure 20 psig, ±2 psig for 3-15 psig output 30 psig, ±2 psig for 3-27 psig output Connections 1/4" NPT Output Capacity 0.16 scfm
Unique commissioning One Push Initialization, fast and robust Ease of Use Large display with NAMUR NE107 support and focus on the essential Robust Design aluminium or polycarbonate cover. internal NCS and a non corrosive sound absorber Superior Control Proven SIPART PS2 pneumatic design with deadband tuning and leakage compensation Fast response time Closed valve application with fast travel times Contactless magnetic sensor for accurate and wear-free detection of valve position
Hazardous and Safe Area Duty. Linear and Rotary actuators. Mounting kits to suit most valve designs. Profibus and Fieldbus communication. Extensive diagnostic features. Electro Pneumatic Valve Positioner. PS2 Valve Positioner Siemens PS2 Valve Positioner Siemens Sipart PS2 Valve Positioner Sipart PS2 Valve Positioner
■ Power supplies 24 V/0.6 A, 1.3 A, 2.5 A and 4 A 12 V/2.0 A and 6.5 A ■ Small mounting surface thanks to slimline design ■ Low energy consumption ■ Minimum energy losses in no-load operation ■ Connection via plug-in terminals ■ input 85... 264 V AC for 120 V and 230 V AC single-phase networks without changeover ■ Operation on 110 to 300 V DC networks ■ Adjustable output voltage ■ Operating temperature –20 to +70 °C ■ International package of standards
SITOP smart is the high-performance standard power supply for automated machinery and plants with 24 V DC or 12 V DC electronics.
SITRANS CC240 is the industrial gateway connecting HART devices (via SITRANS MX300 multiplexer) to the IT environment
Meassuring range: 0 to 10 m/s. Nominal Sizes: From DN 15 to DN 1000 (
The FC310 flowmeter consists of a SITRANS FCS300 sensor and a SITRANS FCT010 transmitter. Sizes: DN15 (½"), DN25 (1"), DN50 (2"), DN80 (3"), DN100 (4"), DN150 (6") Accuracy: ±0.10 % or ±0.20 % Repeatability: ±0.05 % Density accuracy: 2 or 10 kg/m 3
The FC330 flowmeter consists of a SITRANS FCS300 sensor and a SITRANS FCT030 transmitter. This compact sensor and built-in transmitter allow for more efficient skid and plant layout and direct intergartion Into DCS automation systems via Profibus 4.0, Modbus, HART 7.2 or as a standalone solution.
The SITRANS FC430 is amongst the first Coriolis flowmeters to offer SIL 3 certification on the system, meeting the highest standards of safety and reliability.
Measuring range kg/h (lbs/min) From 250 (9,2) to 30.000 (1.102,3). DN 10 to 25. Accuracy: 0.5 %. Pressure max 350 bar. Ambient -40 to 60°C. Medium temp -40 to 125°C. IP66 / IP67. ATEX: II
The SITRANS FCS400 is the market’s most compact sensor. The small size facilitates installation and replacement, and makes it possible to fit multiple units into tight spaces.
The SITRANS FCT030 transmitter delivers true multi-parameter measurements with enhanced efficiency, security and simplicity. It features a modular design for convenient installation and replacement,
Mass flow rate, volume flow rate, density, temperature and fraction flow • Three built-in totalisers freely set for counting mass flow, volume flow, standard volume flow and fraction • Two-stage batch controller • Two digital inputs • Two digital outputs • Low flow cut-off • Configurable upper and lower alarm and warning limits • Comprehensive status and error reporting
Connection ½”, ¾”, 1”, 2” Flow- and temperature measurement Dosing function with external control output Colored, multi-parameter configurable TFT display,rotatable 90° Bidirectional measuring Intuitive setup menu via 4 optical touch keys 2 freely configurable outputs All-metal design: stainless steel
Siemens process control & instrumentation
Siemens is one of the world's leading suppliers of innovative, environmentally friendly products and they have a global unmatched offering of high quality, reliable industrial control solutions.
Siemens' comprehensive range of process instrumentation offers the very best technology for the widest range of applications and industries, including Oil & Gas, Food, Water, Pharmaceuticals, Transport and more.
Siemens, a global company renown for their pioneer-ship in Engineering, work closely with ourselves at Fine Controls UK to deliver the very best solutions across a range of industries. That's why we offer a comprehensive range of Siemens process instrumentation, with extended Siemens warranty options and the guarantee that we can get hold of your required Siemens part if you can't find it on our website.
Whether you want to measure temperature, flow, level or pressure, Siemens industry products can help and they are brought to you by Fine Controls' friendly experts. All Siemens' flow measurement products have a well-established reputation in the industry for reliability and longevity. The range is trusted and renowned to cater to every application and it is why Fine Controls recommends the brand to our valuable customers.
Check out the Fine Controls blog to read our take on the Siemens history of innovative Science & Technology solutions.
Fine Controls' Siemens product range
Below you'll find our extensive range of Siemens products, including electro-pneumatic positions, flow meters, flow monitors, flow transmitters, level controllers, level switches, level transducers, level transmitters, power supplies, pressure transmitters and temperature transmitters.
Can't find what you're looking for? Get in touch with Fine Controls – as official distributors, we'll find it for you.