Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current Sources. Output: 0/4 to 20 mA, HART or 0/2 to 10 V, HART.
The TS Insert is used as a spare part for the SITRANS TS500 or as component to build up complete temperature assemblies.
The TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.
SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-..20mA loop, the output current can read directly with a multimeter. A red/green LED shows the technician the status at a glance.
Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources. Output: 4 - 20 mA, HART. Alarm signal for sensor break or short-circuit according NAMUR 43. Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21.
Galvanically Isolated. Universal Input. Versions for Hazardous Areas. High Accuracy and Stability.
Multi entry. Houses One or Two Transmitters. Sealed to IP67. Digital Display Option.
CONFIGURATION USING USB PORT POWERED CONFIGURATOR. PT100 or THERMOCOUPLE / mV. ISOLATED INPUT. INPUT LINEAR TO TEMPERATURE. (4 to 20) mA TWO WIRE OUTPUT. 10 YEAR WARRANTY.
SIMPLE CONFIGURATION VIA USB PORT. UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input ISOLATED INPUT. PUSH BUTTON USER TRIM. (4 to 20) mA TWO WIRE OUTPUT. 10 YEAR WARRANTY.
HART Protocol. Universal Input. Sensor Burnout Detect. Din Rail Mounting.
HART Protocol. Universal Input. Sensor Burnout Detect. Isolation to 500VAC.
6mm dia. st/st sheath x 75, 100, 150, 200, 250mm immersion. 3 wire Pt100 class B. For use with a compression fitting.
SIMPLE CONFIGURATION VIA USB PORT. ISOLATED PT100, THERMOCOUPLE INPUT. DISPLAY TEMPERATURE in °C /°F or OUTPUT DRIVE in mA. PUSH BUTTON USER TRIM. (4 to 20) mA TWO WIRE OUTPUT. HOUSING ABS PLASTIC OR STAINLESS STEEL. 10 YEAR WARRANTY.
SIMPLE CONFIGURATION VIA USB PORT. UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input. ISOLATED INPUT. DUAL RELAY OUTPUTS 250 V AC 1A. RELAY ISOLATED FROM EACH OTHER. 10 YEAR WARRANTY.
Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources. Output: PROFIBUS PA (variant), Foundation Fieldbus (variant). Explosion-protection. Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
Duct Mounting. Rapid Response. Robust Construction. Output Options.
Push Button Calibration. RTD Sensor Input. In-Head Mounting. LED Over-Range Indication.
Push Button Programmable. Galvanically Isolated. Low Cost. 9 Standard Thermocouple Types.
Suitable For Use With Pt100 or Thermocouple Temperature Probes. Push button configurable. Sensor, Remote or Wall Mounted versions. 4 digit display. Sealed to IP67. Atex approved in ABS housing.
Suitable for Pt100,Ni100,Cu53,Cu100 temperature sensors. 20 mm LCD Display for good readability. Sensor, Wall or Panel Mount Housing Options. Stainless Steel Construction (100mm diameter). IP65 Enclosure.
4 digit LCD display of temperature. Battery powered. Flexible immersion length. 6mm sensor diameter. Temperature range - 50/200 Deg C at tip.
6mm dia. s/s sheath x 75, 100, 150,200,250mm immersion. 3 wire Pt100 class B. 3/4'bsp process connection, (parallel male running nut). 12.7mm x 75mm extension.
Our Temperature Control category includes a vast range of products for the control and monitoring of temperature in a range of installations. With products from leading industry brands including Burkert, Status Instruments and Siemens Industry, you can be assured we bring you only the latest and greatest in temperature control products.
Our range in this category includes a selection of Din Rail Mounted, Field and In Head temperature transmitters, switches and probes. You can use the filters on the left to filter by your chosen manufacturer, or by product type, so it's easy to find the product you are looking for.
Our engineers are experienced and conversant in our entire product range, and so are well equipped - and more than happy - to help you find the right product for your specific requirements. You can contact them using our contact form or on +44 (0) 800 328 8511.
We hold hundreds of items in stock, so much so we couldn't possibly list it all here, so if you don't see what you're looking for, we're confident we'll be able to assist.