Looking for a specific part?
Valves
Pressure range: 0-10 bar, Temperature media: -10°C +130°C, Body material: Stainless Steel 1.4404, Zero dead volume, Corrosion resistant.
Port size 1/4'. Pressure range 0-10 bar. Temperature media -10°C to + 90°C. Body material Brass, stainless steel. Seal material FPM, EPDM or Buna.
Port Connection: Flange, Body Material: Brass and stainless steel 1.4401, Seal Material: NBR, FKM (EPDM on request), Max Pressure: 16 Bar, Manifold Mounted, Manual Overide, Electrical feed back option.
Port connections G
Pressure Range: 0-10 bar, max. Temperature media: -40°C +180°C (seal PTFE), Body material: Brass or St/St, Seal material: NBR, PTFE, Fluid temperature up to +180°C.
Port Connection: G 1/2, G 3/4, G 1. Body Material: Brass, grey cast iron, Seal Material: PTFE/graphite, Max Pressure: 12 Bar, Maximum Temperature 180°C.
Port size 1/2'- 2'. Pressure range 0-10 bar, Temperature media -10°C to +180°C, Body material Brass (valve seat S.St.1.4303), Seal material PTFE.
Port size 1/2' - 2', Pressure range 0.2-16 bar, Temperature media -10°C to +90C, Body material Brass, Seal material NBR, Options - Manual override & Explosion Protection Ex to Eurostandard.
Pressure range 0.2 - 10 bar Port Connections Threaded port G1/2' - G21/2' Operating voltages 24, 110, 230 V/UC Duty cycle 100% continuously rated Rating IP65 Approvals: EEx m II T4 with moulded cable & EEx me II T4 with terminal box
Pressure Range: 0.2-10 bar, max, Body material: Brass or St/St, Seal material: NBR, EPDM or Viton fluoroelastomers, Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard.
Port size 1/2' - 1', Pressure range 1-50 bar, Temperature media -10°C to +90°C, Ambient temperature +55°C, max, Body material Brass, Seal material PTFE (O-rings NBR), Un-effected by pressure surges.
Flow rate 900 (I/min), Pressure range 1-10 bar, Manual override, 1/4 Ported.
Flow rate 300 (I/min), Port connection 6mm, Pressure range 2-10bar , High switch reliability, Fieldbus compatible, Manual override.
Pressure range 2-8 bar Ports G1/8 & 6mm push in DN 13 up to 65 mm Body Polyamide Ambient temp -10 up to +50 °C 24 VDC Duty cycle 100% continuously rated IP65 ATEX EExia IIC T6
Compact Size, Brass or st/st, Manual Override , 1/8 or sub base mounted, 0-10bar.
Pressure Range: 0-10 bar, max. Temperature media: -10°C to +100°C, Body material: Brass or St/St, Seal material: FPM.
Port Connection: G1/8, G1/4, G3/8, sub-base Body Material: Brass & Stainless Steel Seal Material: FKM, PTFE/Graphite & EPDM Pressure: 0 - 25 Bar Media temprature ranges covering '"10°C + 180°C
Press. 0 - 10 bar & Vaccum Ports G1/8' - G1/4', Voltage: 24, 110, 230 V/UC Duty cycle 100% continuously rated IP65 EEx m II T4 with moulded cable & EEx me II T4 with terminal box
Port size 1/8' - 1/4', Pressure range 0-10 bar, Body material Brass + st/st, Seal material FPM.
Port size 1/8' - 1/4' Pressure range 0-10 bar Body material Brass or PA Seal material FKM
Pressure: 0-10 bar max. Tech vacuum. Ports G1/8, G 1/4 and Sub-base connection. From -30 up to +40°C. Volts 24, 110, 230 V/UC. Duty cycle 100% continuously rated. IP 65. EEx-m-II T4, T5 and T6 or EEx-me-II T4, T5 and T6.
Pressure 0-16bar Ports DN1.5-DN2.0. Seals FPM. Body Polyamide/brass. Seal FPM(Viton). Electrical con. With cable/terminal box. Neutral gases. Voltage 24, 110, and 230 V/UC. Duty cycle 100% continuous rated. EEx-m-II T4 / T6 and EEx-me-II T4/T6.
For high flow rates with low inlet pressure. Direct-acting, normally closed. 0 - 0.7 bar1). DN 8 - 12 mm. 1/2' and 3/4'.
Ports:1/4' 3/8' 1/2. Brass or stainless steel 1.4404 (316L). Seal Material: FKM, PTFE/FKM and PTFE/graphite for high temp versions (EPDM on request). Max P: 25 Bar. Direct-acting, normally closed. Up to 100 Bar. Up to 180°C.
Ports: G 3/8 to G 1 Body: Brass/Stainless Seals: FKM, others on request Max P: 10 Bar Piston-operated valve with pressure relief Switches without differential pressure For neutral media and steam Max temp+160°C
Port size 1/4" - 2" Pressure range 0-10 bar, Temperature media ranges covering -30°C to +120°C Body material Brass or Stainless Steel, Seal material NBR, FKM, EPDM Options - Explosion protection Ex to Eurostandard.
Ports: 3/8' to 1'. Body Material: Brass, stainless steel. Seal Material: FKM, others on request. Max P: 10 Bar. Control valve for continuous control of liquids. Low hysteresis and high repeatability. Control with PWM signal.
Port connection 1/4', Pressure range 2-8, Media temperature -10 up to 50°C, Pilot operated.
Ports
Threaded port -
We stock valves specially built for handling a range of requirements, whether you require valves for high pressure, hazardous areas or heavy duty industrial installations.
We also stock a range of Valve Positioners.
We've a number of valves available for purchase directly through our website, though our entire stock range eclipses what we're able to list here.
If you can't find the Valve you need and want to see if we have it in stock, or want some guidance on which valves to buy, contact our friendly team who'll be happy to help get you the products you need.