Fine Controls (UK) Ltd

BURKERT TYPE 2833 - GENERAL PURPOSE PROPORTIONAL SOLENOID CONTROL VALVE

The Type 2833 is available Sub-base mounted or with female threaded ports. Manufactured in a choice of Brass or Stainless steel bodies this proportional valve is direct acting and suitable for use on liquids and gases in positive pressure or vacuum applications.

• 0-16bar
• DN 0.8 - 4 mm
• 1/8", 1/4" or sub-base
• EEX approvals optional
• Brass or ST/ST bodies

Contact us about this product

BURKERT TYPE 2824 - DIRECT ACTING LOW FLOW PROPORTIONAL CONTROL VALVE

The direct acting proportional valve can be used as a control valve for process control and is suitable for technical vacuum. Low hysteresis, high repeatability and high sensitivity ensure superior regulation behavior. Thanks to an elastomeric sealing, the valve closes tightly and securely.

• Low Flow
• 0-12 bar
• DN 0.8 - 2.0 mm
• 1/8" or sub-base version

Contact us about this product

BURKERT TYPE 2835 - 2/2 WAY PROPORTIONAL SOLENOID VALVE

The direct-acting proportional valve Type 2835 can be used as a control valve for process control and is suitable for technical vacuum. Low hysteresis, high repeatability and high sensitivity ensure superior regulation behaviour. Thanks to an elastomeric sealing, the valve closes tightly and securely.

• High sensitivity

• 0 to 25 bar

• DN 2 to 8 mm

• G 3/8 and G ½

Contact us about this product

BURKERT TYPE 6024 - 2/2 WAY PROPORTIONAL SOLENOID VALVE

The direct-acting proportional valve Type 6024 works as an

electromagnetically actuated control valve with relatively high flow rates at low operating pressures. The valve is normally closed.

• For high flow rates with low inlet pressure

• Direct-acting, normally closed

• 0 - 0.7 bar1)

• DN 8 - 12 mm

• 1/2” and 3/4”

Contact us about this product

BURKERT TYPE 6223 - PROPORTIONAL VALVE WITH CONTROL ELECTRONICS

The valve Type 6223 can be used for the control of larger flow quantities. Low hysteresis, high reproducibility and good response sensitivity guarantee good positioning behaviour. The valve closes tight. The push-over coil is easy to replace.

• Port Connection: G 3/8, G 1/2, G 3/4, G 1

• Body Material: Brass, stainless steel on request

• Seal Material: FKM, others on request

• Max Pressure: 10 Bar

• Control valve for continuous control of liquids

• Low hysteresis and high repeatability

• Control with PWM signal

• Servo-assisted, tight closing valve

Contact us about this product