SIEMENS MOORE PRODUCTS

Supply pressure 500 psig Maximum. Sensitivity less than 1/8' Water Column. Adjustment range 1-50"H20 to 15-450 psig. Pipe Size 1/8' NPT - 1/2' NPT/BSPT.

Maximum Output Pressure 3-15psig. Maximum Supply Pressure 100 psig. Flow Capacity 10 SCFM Ratio 1:1 Pipe size 1/4 "

Output Range 0-120 psig Maximum Supply Pressure 150 psig Sensitivity 1” (2.5 cm) of water Air Consumption Less than 5 SCFM (0.17 m3/hr)

Input Signal 760P: 3-15 psig, 3-27 psig, 50% split range 760E: 4-20 mA, 50% split range FM Approvals: Intrinsically Safe: Class I, Division 1, Groups A, B, C, D, Class II, Division 1, Groups E, F and G Class III, Division 1 Span Adjustable –60% to +25% of normal span

Supply Pressure 20 psig, ±2 psig for 3-15 psig output 30 psig, ±2 psig for 3-27 psig output Connections 1/4" NPT Output Capacity 0.16 scfm

Recommended Flow for Optimum Efficiency 1 0.5 scfm at 75 psig Maximum Supply Pressure 1000 psig (69 bar) Pressure Droop Through Filter with 75 psig Supply Pressure and 0.5 scfm flow approximately 1/4 psi (2 kPa) Materials of Construction Brass, lamb's wool, and neoprene.

Maximum supply pressure 80 or 150 psig. Repeatability 1% Adjustment range 2' W.C.-10 to 2.0-120. Inlet and Outlet 1/4"

Instrument Input Pressure Range...................3-15, 3-9, 9-15, and 3-27 psig Supply Pressure Minimum..3 psi above required actuator pressure Maximum 100 psi Air Consumption .0.25 SCFM (in balance condition with 20 psi supply and 9 psi dead ended output) Valve Travel Minimum 1/4" Maximum 4"

Input Ranges 3-15, 3-9, 3-27, 0-15, and 0-30 psig including split Valve-Stroke Ranges 1/4" minimum -48" maximum Supply Pressure 3 psig min above full actuator pressure minimum 150 psig maximum