Jordan Valve releases the new JCVS Control Valve Series

Jordan Valve releases the new JCVS Control Valve Series

Jordan Valve is pleased to announce the introduction of the Jordan Control Valve Series

We are excited about the new additions to our Jordan Valve product portfolio, as the JCVS greatly enhances our industrial control valve offering and will provide additional selling opportunities for our distributors and representatives. We now offer globe style control valves to 24" in a variety of materials, pressures to ANSI 2500, noise mitigation and anti-cavitation trims. Additionally, we have a rotary V-Ball available in 2" – 12", actuators, positioners and other accessories.

Mark E Series (1" - 24" Globe Style Control Valves):

The JCVS Mark E Series is a single port, globe style body, with composition or metal seats, and a balanced valve plug with “push down to close” action.The Flow characteristic of the Mark E Series is linear, quick opening, or equal percent, making it useful in a wide range of applications to suit your needs.

Mark EW Series (Globe Style Control Valves):

The Mark EW Series valve bodies are a single port, globe style bodies with cage guiding, clamped seat rings and push down to close valve plug action.The series features large end connections and expanded internal flow cavities. The valve bodies are available in 4X2, 6X4, 8X4, 8X6, 10X8, 12X6, 12X8, 16X12, 20X16, 24X16, and 24X20 inch sizes. The first number refers to the line size, while the second number refers to the trim and bonnet size.The flow characteristics of the Mark EW Series are linear, quick opening and equal percent. Available in LCC, WBC, WCC, WC9, C5, Monel, and CF8M SST body materials. Other materials are available upon request.

Mark D Series (Globe and Angle Style Control Valves):

The JCVS Mark D Series is a single port, screwed-in metal seated globe style valve, with an unbalanced post –guided plug, and “push down to close” plug action for use in high-pressure applications.The Mark D Series valve is especially useful for throttling or on/off control of liquids or gases. The flow characteristic is equal percent, and flow direction of the Mark D Series is up through the seat ring and past the valve plug, while the Mark DA Series flows in either direction.

Mark HPX and HPAX Series (Globe and Angle Style Control Valves):

Mark HPX Control Valves are designed for high-pressure applications in the process industry. Valves are cage guided, with metal seats and quick change trim. Balanced plugs are pushed down to close. The Mark HPX is a straight globe valve while the HPAX is an angled valve.

Mark H-900/H-1500/H-2500 Series (Globe Style Control Valves):

The Mark H2D is a single port, globe style body with cage guiding, and balanced valve plug with push down to close action. Metal seat, piston rings are used to provide the seal between the valve plug and cage. This configuration is used for general applications where tight shutoff is not required.

Mark 128PQC Series (Control Valves):

The Mark 128-PQC Series Control Valves are suitable for on/off dump valve service in oil & gas production applications, in either sweet or sour gas conditions. These valves are also useful for on/off high-pressure control of numerous gases and liquids and can be used with materials that are viscous or erosive.

Mark V-100 Series (Rotary Control Valves):

Available in 2" through 12" Sizes

The Mark V100 Ball Valve design utilises a standard ball with a triangular-shaped wedge formed in it. This design allows for both throttling control and on/off service used in conjunction with a variety of actuators.

You may also like...


Not sure which product you need?

Contact our technical sales advisors here.

Need a bespoke part?

Our team of engineers are fully equipped to provide bespoke system design and manufacture.

This process involves specifying, procuring, calibrating and maintaining instrumentation and control systems for industrial and commercial process control applications.

Call our technical sales team for advice

helpdesk technician