EXCLUSIVE UK DISTRIBUTOR TO FAIRCHILD INDUSTRIAL PRODUCTS
Fine Controls (UK) are proud to be the EXCLUSIVE UK DISTRIBUTOR for the Fairchild range of precision pneumatic and electro pneumatic controls. All Fairchild products are renowned for their quality, accuracy and durability. We have unsurpassed experience in the guidance of customers in the selection and application of Fairchild products.
PRECISION PRESSURE REGULATORS:
Whatever the application, simple set point control, accurate pressure measurement, sub-atmospheric, aggressive environments or high flow capacity. Fairchild has a regulator designed for your specific needs, all of which incorporate high sensitivity and extreme stability. If we cannot meet your specification nobody can!
VOLUME BOOSTERS, RATIO, BIAS COMPUTING AND SELECTOR RELAYS:
- Do you need to multiply or divide a pneumatic signal?
- Or provide a positive or negative bias?
- How about averaging, totalising or amplifying the differential between signals?
- Select the higher or lower of two signals?
The Fairchild range of pneumatic relays offer as many solutions as you have questions.
The Fairchild T6000 and T7800 series offer the low cost, high specification solution to interfacing electronic control with pneumatic actuation. Standard process mA or Vdc inputs are converted to any one of six output ranges from 3-15 psi to 0-120 psi. Vibration and supply pressure immune, these units will accept supply pressure up to 150 psi without the need for a supply regulator. The T7800 series also incorporates internal feedback to provide improved accuracy (typically 0.1% F.S). Available with Cenelec/FM/CSA approval for Explosion-proof and intrinsically safe area operation. EExd, EExia - ex-stock!
T8000 series accept any of six pneumatic inputs from 0-15 psi to 0-120 psi and provide an output of either 4-20 or 10-50 mA. Up to two P/I channels may be installed in each housing. Explosion-proof and I.S. operation approvals available for hazardous areas.
MANIFOLD MOUNTING AND ACCESSORIES:
T600, T7800 and T8000 series units are all available with an optional manifold system enabling 3, 5, 10 or 15 units to be mounted with a minimum of pipe work. Each position has integral check valves, allowing simple ‘plug-in' pneumatic connection. A range of auto-manual stations are also available to maintain and monitor output pressure.