Home Call Call 0

Loading...
Loading...

Midland

Filter Products Close Filters

Midland-ACS is a previous partner of Xylem Flow Control Limited, a subsidiary of Xylem Inc, a leading global water technology provider but has recently been acquired by Rotork Instruments, who will now be renamed Rotork Midland Ltd. 

It will sit within the Rotork Instruments Division, adding to its Fairchild, Soldo and YTC brands and it is hoped that the acquisition will further enhance Rotork’s range of instrumentation products. 

All the products have been selected for their reliability and longevity, and it is for this reason that Fine Controls offer a large selection of the firm’s products for the oil, gas and petrochemical industries

MIDLAND ACS 3000 SERIES - STAINLESS STEEL VOLUME BOOSTER Model Number: 3000

Supply / Output connection: ¼', ½' or ¾' NPT (F). Signal Connection: ¼' NPT (F). Supply Pressure: Up to 150 psig (10.3 bar). Pressure Ratio: 1:1. Operating Supply Gases: Air, Nitrogen, Methane (Natural Gas)

MIDLAND ACS DN2 SERIES - BALL SEATED HYDRAULIC SOLENOID PILOT VALVE Model Number: DN2

A ball seated version of the DN2 hydraulic control valve, the st/st seat and ceramic ball design ensures a leak tight shut off. The DN2 valve design incorporates a balanced internal piloting system and lever mechanism.

MIDLAND ACS DN2 SERIES - HYDRAULIC SOLENOID PILOT VALVE WITH CARTRIDGE INSERT SYSTEM Model Number: DN2

This version of the DN2 series features the new Cartridge Insert System, alternative to conventional ball-seated type internals. The one-piece Poppet Cartridge Insert System simplifies replacement and reduces repair costs.

MIDLAND ACS DN2 SERIES - IECEX HYDRAULIC SOLENOID PILOT VALVE Model Number: DN2

An IECEX compliant DN2 series cartridge insert hydraulic control valve. St/St design ensures leak tight shut off and incorporates a balanced internal piloting system to enable the low powered coil to switch the valve at high pressures.

MIDLAND ACS DN3 SERIES - BALL SEATED HYDRAULIC SOLENOID PILOT VALVE Model Number: DN3

St/St seat and ceramic ball design ensure a leak tight shut off and a balanced internal piloting system and lever mechanism to enable low powered operators to switch the valve at high pressures.

MIDLAND ACS DN5 SERIES - HYDRAULIC INTERFACE CONTROL VALVE Model Number: DN5

Piston operator and ball seated design, ensures leak tight shut off and positive control. Can be supplied with a range of operators, for varied pressures & ambient temperatures, and be in-line mounted or subplate/multi-station manifold mounted.

MIDLAND ACS DN5 SERIES - IECEX HYDRAULIC SOLENOID PILOT VALVE Model Number: DN5

IECEX compliant version of the DN5 series metal to metal seated hydraulic control valve. St/st design ensures leak tight shut off, incorporating a balanced internal piloting system enabling the solenoid coil to switch the valve at high pressures.

MIDLAND ACS DN5 SERIES - METAL TO METAL SEATED HYDRAULIC SOLENOID PILOT VALVE Model Number: DN5

The fully st/st DN5 Pilot and Mainstage use cartridge insert technology to simplify replacement and reduce downtime costs. Features include 'O' Ring interfaces for subplate fitting or a manifold mount for use with actuators and wellhead applications.

MIDLAND ACS IMPACT 2000 - INTERNATIONAL MODULAR PNEUMATIC ACTUATOR CONTROL TECHNOLOGY Model Number: IMPACT 2000

IMPACT� range is a high integrity modular pneumatic actuator control assembly system in 316 Stainless Steel, used for the control and sequencing of process valve actuators on oil and gas facilities and pipelines.

MIDLAND ACS MODEL 1500 - STAINLESS STEEL SPOOL VALVE Model Number: 1500

Hazardous area solenoids. Coil with 316 or aluminium housing. Closed centre. Atex Certification. CENELEC approvals. 1/4'NPT (BSP option available)

MIDLAND ACS MODEL 1600 - STAINLESS STEEL SPOOL VALVE Model Number: 1600

Hazardous area solenoids. Coil with 316 or aluminium housing. Block before bleed. 1/2'NPT (BSP option available). Atex Certification

MIDLAND ACS MODEL 1750 - STAINLESS STEEL POPPET VALVE Model Number: 1750

High flow. Hazardous area solenoids. Coil with 316 housing. Atex Certification. CENELEC - UL approvals. 1/4' NPT and (BSP). Low temperature range.

MIDLAND ACS MODEL 1800 - STAINLESS STEEL FLUOSLIDE DIRECTIONAL CONTROL VALVE Model Number: 1800

Heavy duty. High flow. Critical applications. Hazardous area solenoids. 1/4' NPT (BSP optionavailable)

MIDLAND ACS MODEL 3500 - STAINLESS STEEL FILTER Model Number: 3500

Large flow paths minimise pressure drop. 316 Stainless steel throughout. Large stainless steel element. 3/4', 1' NPT and BSP.

MIDLAND ACS MODEL 3500 - STAINLESS STEEL FILTER REGULATOR Model Number: 3500

316 Stainless steel throughout. Large flow paths minimise pressure drop. Integral mounting holes. Tagging facility built in. Filter Unit. 3/4', 1', NPT (BSP option available)

MIDLAND ACS MODEL 3500 - STAINLESS STEEL LUBRICATOR Model Number: 3500

Accurate drip rate adjustment. Can be filled under pressure. Transparent sight feed dome. Built in flow sensor. Filter Unit. 1/2' NPT (BSP option not available)

MIDLAND ACS MODEL 3500 - STAINLESS STEEL PRESSURE REGULATOR Model Number: 3500

316 Stainless steel throughout. Large flow. High relief flow. Integral mounting holes. 3/4', 1', NPT(BSP option available). Tagging facility built in.

MIDLAND ACS MODEL 3550 - STAINLESS STEEL FILTER Model Number: 3550

Large flow paths minimise pressure drop. 316 Stainless steel throughout. Large Stainless Steel element. 1/4', 1/2', 3/4' NPT and BSP.

MIDLAND ACS MODEL 3550 - STAINLESS STEEL FILTER REGULATOR Model Number: 3550

316 Stainless steel throughout. Large flow paths minimise pressure drop. Rolling diaphragm design. Precision adjustment. Filter Unit. 1/4', 1/2', 3/4' NPT and BSP.

MIDLAND ACS MODEL 3550 - STAINLESS STEEL PRESSURE REGULATORS Model Number: 3550

316 Stainless steel throughout, Large flow characteristics, Rolling diaphragm design, High relief flow, Precision adjustment, Integral mounting holes, Filter Unit, 1/4', 1/2', 3/4' NPT (BSP option available).

MIDLAND ACS MODEL 3575 - STAINLESS STEEL FILTER Model Number: 3575

Ambient temperature range. Standard: -20

MIDLAND ACS MODEL 4500 - STAINLESS STEEL FLOW REGULATOR Model Number: 4500

316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return). 316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction) 1/4', 3/8', 1/2' 3/4'

MIDLAND ACS MODEL 4500 - STAINLESS STEEL NEEDLE VALVE Model Number: 4500

316 Stainless Steel needle valve with 3mm or 6mm orifice. 316 Stainless Steel exhaust flow regulator/ breather supplied complete with tamper proof cap. 1/4', 3/8' 1/2' NPT and (BSP option).

MIDLAND ACS MODEL 4500 - STAINLESS STEEL NON RETURN CHECK VALVE Model Number: 4500

316 Stainless Steel non return valves for pressures up to 12 bar (174 psi). 316 Stainless Steel non return valves for pressures up to to 25 bar (362 psi). 1/4', 3/8', 1/2', 3/4', 1' NPT and (BSP option).

MIDLAND ACS MODEL 4500 - STAINLESS STEEL PRESSURE SWITCH Model Number: 4500

Compact / Lightweight. 5 pressure ratings. Integrated tagging facility. Fluoroelastomer seals. 3/2 and 5/2 versions. 1/4' NPT (BSP option available). 1/8' NPT Pilot port

MIDLAND ACS MODEL 4500 - STAINLESS STEEL QUICK EXHAUST VALVE Model Number: 4500

Our Stainless Steel non-return valves are manufacture in two max pressure ranges, 12bar or 25bar, and are suitable for use on gas or liquid applications.

MIDLAND ACS MODEL 4500 - STAINLESS STEEL SHUTTLE VALVE Model Number: 4500

316 Stainless Steel shuttle valves for three way 'OR' function. Filtered lubricated or non-lubricated air, inert gas, sweet ( -20

Showing 1 to 30 of 37 (2 Pages)

Why Do We Supply Midland Products?

The brand is renowned globally as having an outstanding reputation for high quality process control and instrumentation. 

XFC were a long-standing supplier of high quality solenoid valves and the acquisition to Rotork will enable the firm to further expand sales and coverage of Midland-branded products. 

So for all your Midland ACS products, look no further than the leading distributor, Fine Controls.

Get peace of mind that you are getting the very best service at the very best price and for expert knowledge on any of the products, call the team today on 0151 343 9966.

Can't find the right part? We have 1000's more products in stock
Call now: +44 (0) 151 343 9966