Fine Controls (UK) Ltd

LANDON KINGSWAY MKI - FREE FALL FIRE VALVE

The Landon Kingsway range of free-fall fire valves provide a compact, leak-proof positive action mechanism that can be installed in either horizontal or vertical pipe runs on oil, gas or any non-aggressive media. The valve may be used for either cut-off or dump applications. The free-fall linkage allows the weight to start to fall before it is required to move the valve lever. This makes sure that the weight achieves sufficient momentum.

• Material: Cast Iron

• Max. Pressure: 14 Bar

• Standard Cable: 9m

• Valve Rotation: ¼ turn

• Fusible Link: 71°C as standard

Contact us about this product

LANDON KINGSWAY MERCURY SWITCH - FREE FALL FIRE VALVE

The Landon Kingsway mercury switches are designed to be used in conjunction with our Free-Fall Fire Valves to provide position sensing or to cut power to oil burner pump motors in the event of a fire. The unit is available in both a single and three-phase style although the three connections on the threephase version could be used to control three singlephase devices. Both versions contain contacts that remain closed while the valve is in its’ normal state (one contact on the single phase, 3 on the 3-phase) and a separate normally open contact that is suitable for sounding an alarm as it closes if the valve lever drops.

• Enclosure Weatherproof grey epoxy coated steel plate.

• IP65 rated
• Dimensions 139 x 177 x 48mm
• Fixing Centres 102mm
• Electrical Entry 20mm conduit knockout
• Contact Rating 5A, 250V ac max.
• Weight 0.6kg

Contact us about this product

LANDON KINGSWAY QUICK RELEASE - MANUAL QUICK RELEASE VALVE

The Manual Quick Release Mechanism is designed for use with our free-fall fire valves. The steel cable
from the valve is looped around the pulley and is released if the button is pressed allowing the valve
arm to fall.

• Material Red painted cast aluminium body, plastic button, brass pulley.
• Dimensions 135 x 76 x 82.5mm
• Fixing Centres 60mm PCD, Ø7mm
• Force to release 40N approx.
• Weight 0.3kg

Contact us about this product

LANDON KINGSWAY ELECTROMEK MKII - QUICK RELEASE MECHANISM

The Electromek is a manual quick release mechanism that also contains a pair of change-over contacts that operate either when the button is pushed or when the cable goes slack for any other reason (such as a thermal link melting). The electrical contacts may be used to sound an alarm, de-activate equipment or send a signal to a fire control panel.

• Enclosure Diecast Aluminium Alloy
• Dimensions 131 x 172 x 102mm overall
• Fixing Centres 4 holes, Ø4mm
• Protection Rating IP52
• Switch Rating 250V AC, 5A
• Wire Size 2.5mm² max
• Conduit Connection 2x 20mm E.T.
• Pressure to release 40N approx.
• Min plunger loading 23N minimum
• Weight 1.4kg

Contact us about this product

LANDON KINGSWAY SEVERLEK SWITCH - EMERGENCY PANIC BUTTON

The Severlek emergency button has a variety of uses where it is required to have a latching push button
switch to sound an alarm or de-activate equipment. The switch has both a normally open and a normally
closed contact pair which both change state on the switch being pressed.

• Dimensions 89 x 71 x 95mm
• Fixing centres 74 x 57mm Ø8mm
• Protection rating IP65
• Switch rating 2KVA AC, 100W DC
• Wire size 2x 2.5mm²
• Conduit Connection Pg16
• Weight 0.4kg

Contact us about this product

LANDON KINGSWAY MKI - SOLENOID QUICK RELEASE MECHANISM

The Solenoid Quick Release Mechanism MKI is designed to provide a simple electro-mechanical release mechanism for gravity-operated devices such as the Landon Kingsway free fall fire valve. The system consists of a steel cable wound around a drum with a solenoid arranged so that when energised the drum is locked in place. If the electrical supply to the solenoid is interrupted then the solenoid latch releases the drum and the weight of the attached load causes the cable to unwind. The MKII unit is as above but incorporates two switched power outputs, one normally on and turns off, the other is normally off and turns on in the event of an emergency. 

Available in:
• SQRM Mkl 24vdc
• SQRM Mkl 110vac
• SQRM Mkl 230vac
• SQRM Mkll 24vdc C/W Aux Switches
• SQRM Mkll 110vac C/W Aux Switches
• SQRM Mkll 230vac C/W Aux Switches

Contact us about this product

LANDON KINGSWAY CHARGER - BATTERY TRICKLE CHARGER

Designed for fire alarm or stand alone use. Battery space is provided in all models. Their solid construction, complimented by a pleasing, textured, grey finish enclosure, ensures they are suitable for a wide range of applications. Designed specifically for sealed lead acid batteries, microprocessor control ensures correct management of the charging voltage and current. Fault monitoring outputs are provided for remote signalling, together with led indications on the enclosure door. Can be used for continuous load applications, such as Smoke Dispersal Systems. Load relays, with changeover contacts, are standard fitment.

• Designed to EN54 Pt.4
• For fire alarm or stand alone use
• Solid construction
• Proven reliability
• Constant voltage charging
• Visual and audible fault warnings
• Space for batteries
• Suitable for sealed lead acid batteries
• Supplied with double pole relay outputs for Smoke
• Dispersal or Bell Booster use
• Fault relay output

Contact us about this product

LANDON KINGSWAY PANEL - FIRE CONTROL PANEL

The Fire Control Panel is used as the main control unit for a fire protection system. It can be connected to various sensors such as panic buttons, electro thermal links and gas detectors using a simple loop wiring system. The panel provides a normally on power outlet to control fire valves, boilers and a normally off power supply to the alarm(s). In addition, a spare set of changeover volt free contacts is provided for connection to BMS or other.

Available in:

• Fire Control Panel FCP 2002 230vac
• Fire Control Panel FCP 2002 24vdc

Contact us about this product

LANDON KINGSWAY ALARM - AUDIO VISUAL ALARM

This is an essential form of alarm where there is a need, for example, hearing and visually impared people, where it can be both seen and heard. The audio visual alarm provides both an electronic sounder and a Xenon beacon unit with a sounder ‘mute’ device.

• 24V DC Version

• 230 V AC Version

• 95dB intermittent tone

Contact us about this product

LANDON KINGSWAY CABINET - DRY RISER INLET & OUTLET CABINETS

Dry riser gate valves act as outlets from the riser main. These valves are situated on each floor of the high rise building and are normally housed in outlet cabinets which are manufactured to BS5041 part 4. Dry riser gate valves come complete with inlets flanged 65mm BS4504 PN16, 2.5”BS10 table D and screwed 2.5” BSPT, outlets to BS336, complete with blank cap and chain, strap and padlock, complying to BS5041 part 2. An inlet breeching at ground level provides the connection to the water supply. The system is normally dry and is charged by the fire brigade in an emergency. Breeching inlets have either 2 or 4 inlet connections complete with 2.5” male instantaneous inlets to BS336 fitted with non-return valves, 1” drain valve and caps and chains. A 100mm (4”) rising main uses a 2-way inlet breeching in a vertical or horizontal position. A 150mm (6”) rising main uses a 4-Way inlet breeching.

Available in:

• Dry Riser Outlet Cabinet

• Dry Riser Inlet Cabinet

Contact us about this product