Looking for a specific part?
Solenoid Valves
THIS PRODUCT IS NO LONGER AVAILABLE Direct acting, 2way Normally closed, EExed & EExem Options, Suitable for Vacuum applications.
Port Connection: G 1/4, G 3/8, G 1/2. Body Material: Brass with stainless steel seat 1.4305 or stainless steel body 1.4581. Seal Material: FKM, PTFE (others on request). Max Pressure: 100 Bar. Maximum Temperature 180°C.
This version of the DN2 series features the new Cartridge Insert System, alternative to conventional ball-seated type internals. The one-piece Poppet Cartridge Insert System simplifies replacement and reduces repair costs.
An IECEX compliant DN2 series cartridge insert hydraulic control valve. St/St design ensures leak tight shut off and incorporates a balanced internal piloting system to enable the low powered coil to switch the valve at high pressures.
Body-Brass/stainless steel. Ports
For high flow rates with low inlet pressure. Direct-acting, normally closed. 0 - 0.7 bar1). DN 8 - 12 mm. 1/2' and 3/4'.
Port Connection: G 1/4. Body Material: Stainless steel 1.4401. Seal Material: Stainless steel/PCTFE. Max Pressure: 250 Bar. Direct-acting, normally closed and normally open. Electrical connection cable plug Form A. Also available with ATEX approval.
Ports: 3/8' to 1'. Body Material: Brass, stainless steel. Seal Material: FKM, others on request. Max P: 10 Bar. Control valve for continuous control of liquids. Low hysteresis and high repeatability. Control with PWM signal.
Ports: G 3/8 to G 1 Body: Brass/Stainless Seals: FKM, others on request Max P: 10 Bar Piston-operated valve with pressure relief Switches without differential pressure For neutral media and steam Max temp+160°C
Fully compatible with Phoenix Inline System, Combination of Fieldbus, pilot valves and I/O modules, High flexibility, Compact design, High flow rate.
Press. 0 - 10 bar & Vaccum Ports G1/8' - G1/4', Voltage: 24, 110, 230 V/UC Duty cycle 100% continuously rated IP65 EEx m II T4 with moulded cable & EEx me II T4 with terminal box
Threaded port -
Ports
DN 8 & 9 Ports 1/4' BSP or NPT. Body Polyamide. Seals- NBR, NBR and PUR. Electrical connection With cable (3m length). Volts 24, 110, & 230 V/UC. Duty cycle 100% continuously rated. IP65. II 2G EEx m II T 5 PTB 00 ATEX 2129X II 2DIP 65T 100°C.
Electrical 3mt moulded cable or terminal box. Port connections Threaded port
Ports port
Pressure 0-16bar Ports DN1.5-DN2.0. Seals FPM. Body Polyamide/brass. Seal FPM(Viton). Electrical con. With cable/terminal box. Neutral gases. Voltage 24, 110, and 230 V/UC. Duty cycle 100% continuous rated. EEx-m-II T4 / T6 and EEx-me-II T4/T6.
Ports:1/4' 3/8' 1/2. Brass or stainless steel 1.4404 (316L). Seal Material: FKM, PTFE/FKM and PTFE/graphite for high temp versions (EPDM on request). Max P: 25 Bar. Direct-acting, normally closed. Up to 100 Bar. Up to 180°C.
Port size 1/4'. Pressure range 0-10 bar. Temperature media -10°C to + 90°C. Body material Brass, stainless steel. Seal material FPM, EPDM or Buna.
Port size 1/2'- 2'. Pressure range 0-10 bar, Temperature media -10°C to +180°C, Body material Brass (valve seat S.St.1.4303), Seal material PTFE.
Port Connection: Flange, Body Material: Brass and stainless steel 1.4401, Seal Material: NBR, FKM (EPDM on request), Max Pressure: 16 Bar, Manifold Mounted, Manual Overide, Electrical feed back option.
Port size 1/8' - 1/4' Pressure range 0-10 bar Body material Brass or PA Seal material FKM
THIS PRODUCT IS NO LONGER AVAILABLE Low Flow, 0-12 bar, DN 0.8 - 2.0 mm, 1/8' or sub-base version.
0-16bar, DN 0.8 - 4 mm, 1/8', 1/4' or sub-base, EEX approvals optional, Brass or ST/ST bodies.
Flow rate 300 (I/min), Port connection 6mm, Pressure range 2-10bar , High switch reliability, Fieldbus compatible, Manual override.
Port size 1/4" - 2" Pressure range 0-10 bar, Temperature media ranges covering -30°C to +120°C Body material Brass or Stainless Steel, Seal material NBR, FKM, EPDM Options - Explosion protection Ex to Eurostandard.The standard brass housing satisfies all European drinking water requirements, WRAS Approved Materials on request
A ball seated version of the DN2 hydraulic control valve, the st/st seat and ceramic ball design ensures a leak tight shut off. The DN2 valve design incorporates a balanced internal piloting system and lever mechanism.
High sensitivity. 0 to 25 bar. DN 2 to 8 mm. G 3/8 and G
Pressure range 2-8 bar Ports G1/8 & 6mm push in DN 13 up to 65 mm Body Polyamide Ambient temp -10 up to +50 °C 24 VDC Duty cycle 100% continuously rated IP65 ATEX EExia IIC T6
Port size 1/4" - 2" Pressure range 0-10 bar, Temperature media ranges covering -30°C to +120°C Body material Brass or Stainless Steel, Seal material NBR, FKM, EPDM Options - Explosion protection Ex to Eurostandard.