Siemens

The temperature sensor line is delivered with direct connected cable. With its construction based on mineral insulated cable (MIC) supports a wide range of applications.

The temperature sensor line is equipped with direct mount connectors (M12, Lemo usw.). With its construction based on mineral insulated cable (MIC) supports a wide range of applications.

This temperature sensor line for sanitary applications provides a wide range of appropriate process connections for the classical temperature measurement

The industry-grade temperature sensor supports a wide range of measuring go from basic applications to solutions in harsh environment.

Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current Sources. Output: 0/4 to 20 mA, HART or 0/2 to 10 V, HART.

Max. Range: 10 m (33 ft). Min. Range: 0.3 m (1 ft). Max. Temperature: 73°C (163°F) (CSA/FM model) 60°C (140°F) (ATEX model). Frequency: 44 kHz.

The TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.

SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-..20mA loop, the output current can read directly with a multimeter. A red/green LED shows the technician the status at a glance.

Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources. Output: 4 - 20 mA, HART. Alarm signal for sensor break or short-circuit according NAMUR 43. Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21.

Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources. Output: PROFIBUS PA (variant), Foundation Fieldbus (variant). Explosion-protection. Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21

Valve sizing is a crucial part of any application and if calculated incorrectly, can cause major issues when your valve is delivered on site. Fine Controls has put together a collection of valve sizing software, purposely designed by our suppliers to aid in product selection and correct sizing.

THIS PRODUCT IS NO LONGER AVAILABLE FROM 30TH MAY 2017 SITRANS FUE1010 Clamp On Ultrasonic Flow Meter is a highly accurate clamp-on non-intrusive ultrasonic flowmeter for revenue grade thermal energy sub-metering and energy efficiency distribution monitoring, with a real time coefficient of performance (COP) for HVAC systems. The meter is available in single and dual channel or dual path configurations, with your choice of IP65 (NEMA 4X) dedicated wall mount or IP40 (NEMA 1) portable enclosures.

THIS PRODUCT IS NO LONGER AVAILABLE FROM 30TH MAY 2017 SITRANS FUG1010 clamp-on non-intrusive ultrasonic flow meter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.

THIS PRODUCT IS NO LONGER AVAILABLE FROM 30TH MAY 2017 SITRANS FUH1010 clamp-on non-intrusive ultrasonic flow meter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. It is available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures. The meter has two application areas: Volumetric flowmetering and mass/standard volume flowmetering.

THIS PRODUCT IS NO LONGER AVAILABLE FROM 30TH MAY 2017 SITRANS F US clamp-on ultrasonic flow meters measure the flow of electrically conductive and non-conductive liquids. All flow meters offer easy installation, no pressure drop or energy loss, a wide turn-down ratio with no need to cut the pipe or stop the flow and a minimal maintenance since the external transducers do not require periodic cleaning.

THIS PRODUCT IS NO LONGER AVAILABLE FROM 30TH MAY 2017 The SITRANS FUP1010 clamp-on non-intrusive ultrasonic flow meter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam transit time or Doppler mode, making it suitable for virtually any liquid. The meter is ideal for general flow survey work where high accuracy is required and is available in single and dual channel or dual path configurations.

Wastewater collection via sewerage systems has proven challenging for Welsh Water due to the country’s mountainous topography. Many customers are situated within valleys, necessitating the use of sewage pumping stations (SPSs) that vary greatly in size and pumping capacity. Until recently, the majority of the 1,861 SPSs belonging to Welsh Water had no system in place to measure flow. Siemens was asked to propose a potential solution as they had previously provided the company with numerous electromagnetic flowmeters for new installations as well as a number of clamp-on ultrasonic flowmeters for large pipes. Recognizing that the SITRANS FST020 was an ideal fit, Welsh Water ultimately selected Siemens as the supplier of clamp-on instrumentation for their large-scale retrofit project.