Level Control

Dual point, long-range level monitoring. Easy to install and program. Compatible with all Echomax transducers. Backlit display in standard engineering units. Auto level-to-volume conversion. Dolphin Plus and SmartLinx compatible.

Ten point, long-range level monitoring. Easy to install and program. Compatible with all Echomax transducers. Backlit display in standard engineering units. Auto level-to-volume conversion. Dolphin Plus and SmartLinx compatible.

Max. Range: 10 m (33 ft). Min. Range: 0.3 m (1 ft). Max. Temperature: 73°C (163°F) (CSA/FM model) 60°C (140°F) (ATEX model). Frequency: 44 kHz.

Max. Range: XLT-30: 30 m (98 ft) XLT-60: 60 m (200 ft). Min. Range: XLT-30: 0.9 m (3 ft) XLT-60: 1.8 m (6 ft). Max. Temperature: 150°C (300°F). Frequency: XLT-30: 22 kHz XLT-60: 13 kHz.

Monitors wet wells, weirs and flumes. Digital communications with built-in Modbus RTU via RS-485. Compatible with SmartLinx system and SIMATIC PDM configuration software. Single or dual point level monitoring. 6 relay (standard), 1or3 relay (opt.)

Outputs for alarms, chart recorders, controllers and integration of existing systems. Monitors wet wells, weirs and flumes. Energy-saving function with built-in real-time clock. Special control mode to reduce grease rings and other deposits.

Narrow beam angle of only 10°, Chemically resistant PVDF copolymer enclosure and CSM rubber face, Measuring range: 8 m (26 ft) for measurement of liquids and slurries. Fully submersible: IP68 degree of protection.

Range: 245mm (10"). Process Temperature: -40 to +150°C (-40 to +302°F)

THIS PRODUCT IS NO LONGER AVAILABLE Range: 0.30 up to 7 meters, Accuracy

Range: 0.25 to 5 m (0.8 to 16.4 ft). Process temperature: -40 to 60°C (-40 to 140°F). Output: One relay, 4 to 20 mA (3-wire) or 4 to 20 mA (2-wire).

The SITRANS LG series comes in four different models: LG240, LG250, LG260 & LG270 Technology: Guided wave radar Range: 300 - 75 000 mm Process Temp: -196 - +450C Vessel Pressure: -1 - +400 bar

Technology: Guided wave radar. Range: 22.5m (75 ft). Process Temperature: -196 to 427°C (-320 to 800°F). Process Pressure: Full vacuum to 431 bar g (6250 psi g), probe dependent

Technology: FMCW radar Range: 100m (329 ft) Process Temperature: -40 to 200 °C (-40 to 392 °F) Process Pressure: 0.5 bar g (7.25 psi g)

4-20mA output. Measuring range 0.3-20 mt. Hart or profibus communication. Safe or hazardous area duty. Radar Level Transmitter.

High temperature. High pressure. to a range of 50 m (164 ft); Ideal for low dielectric media. Radar Level Transmitter.

Technology: FMCW Radar. Range: 100m. Process Temperature: -40 to 200°C (-40 to 392°F). Process Pressure: Up to 3BAR.

Safe or hazardous area duty. 4-20mA, Hart output. Liquids or slurries. Radar Level Transmitter.

The Type 8177 is a non-contact ultrasonic level measuring device, designed for continuous level measurement in open or closed vessels. The unit is suitable for liquids, but also for solids, in virtually all industries, particularly in water and waste water management.

The Type 8136 is a non-contact radar level transmitter for continuous level measurement. This unit is available in two versions: One with encapsulated horn antenna which is particularly suitable for level measurement of aggressive liquids in small vessels. The other with a plastic horn antenna particularly suitable for flow measurement in open flumes or gauge measurement in waters.

The Type 8137 is a non-contact radar level transmitter for continuous level measurement. The unit is available in two versions: - with thread and horn antenna (ø 40 mm) particularly suitable for use in small tanks and process vessels for measurement of practically any product. Also with flange and horn antenna (ø 40 or 75 mm) particularly suitable for use in storage tanks and process vessels for measurement of products such as solvent, hydrocarbons and fuels under extremely difficult process conditions.

The Type 8138 is a non-contact radar level transmitter for continuous level measurement. It is particularly suitable for use in small vessels that contain beverage liquids under sanitary process conditions.

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. With a measuring range up to 75 m, the 8188 is best suited for tall vessels. Even process conditions such as strong steam generation, density fluctuations or changes of the dielectric constant do not influence the accuracy of the measurement. Build-up or condensation on the probe or vessel wall do not influence the measuring result. A liquid interface measurement is also possible with the Type 8188, typically an oil/water interface.

The Type 8189 is a level measurement device with interchangeable rod probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. the main application targets are in Food and Beverage (F&B) and pharmaceutical tanks to the new rod in stainless steel 1.4435 with Ra < 0.76 µm. For applications with corrosive liquids a PFA coated version is available.

Measurements: distance, level, volume, and open channel flow Process connections: 2” NPT, 2" BSPT, 2" G Wetted parts: PVDF and optional ETFE sensors Range: 6 meters or optional 12 meters Accuracy: ±6mm Communications/ outputs 4 to 20 mA HART 7 Approvals: ATEX, CSA, FM, INMETRO, KOSHA, EAC, IECEx , Nepsi , TIIS, DNV GL, Lloyds ,