Burkert

The Type 8138 is a non-contact radar level transmitter for continuous level measurement. It is particularly suitable for use in small vessels that contain beverage liquids under sanitary process conditions.

THIS PRODUCT IS NO LONGER AVAILABLE Range: 0.30 up to 7 meters, Accuracy

THIS PRODUCT IS NO LONGER AVAILABLE Pressure Range: 0.30 up to 10 metres, Accuracy: +/ 0.25% of full scale, Resolution: +/- 3mm, Supply Voltage: 18-32 VDC or 110-230AC, Medium temperature: -40 up to +80°C.

The Type 8177 is a non-contact ultrasonic level measuring device, designed for continuous level measurement in open or closed vessels. The unit is suitable for liquids, but also for solids, in virtually all industries, particularly in water and waste water management.

Switching point at tilt of 7°

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. With a measuring range up to 75 m, the 8188 is best suited for tall vessels. Even process conditions such as strong steam generation, density fluctuations or changes of the dielectric constant do not influence the accuracy of the measurement. Build-up or condensation on the probe or vessel wall do not influence the measuring result. A liquid interface measurement is also possible with the Type 8188, typically an oil/water interface.

The Type 8189 is a level measurement device with interchangeable rod probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. the main application targets are in Food and Beverage (F&B) and pharmaceutical tanks to the new rod in stainless steel 1.4435 with Ra < 0.76 µm. For applications with corrosive liquids a PFA coated version is available.

Measuring range is 0-29 psi/0-729 psi. Accuracy is

THIS PRODUCT HAS BEEN REPLACED BY TYPE 8316 Ceramic measurement cell. Two-wire version. Compact, stable construction for the highest operational reliability. Media stop system if bursting pressure exceeded.

The compact Type 8316 pressure transmitter meets the highest requirements with regard to mechanical loading, EMC characteristics and operational reliability and is particularly suitable for demanding industrial applications. This product replaces Burkert Type 8314.

Measuring range -40°F to 257°F, Switching range +/-1.0°F, Repeatability 0.4%, Sensor element Pt100, Wetted parts: stainless steel. Voltage Supply: 12-30 VDC.

Microprocessor-controlled electronics. Switchable standard input signal. Infinitely variable PWM frequency. Optional RS232 or RS485 interface.

Continuous 2point 3point & On/Off control. Ratio control function. Sensor inputs (4-20 mA, 0-10 V, frequency, RDT). Control of proportional process & motor valves. Burkert proportional valves and flow meters are memorized. 1/16 DIN size panel version

Display: LC graphic display, light blue backlit; 128x168 pixels resolution; German, English, French languages. Keypad: 4 soft keys [F1] [F2] [F3] [F4] for dynamic functions 1 central navigation key.

The mxCONTROL multifunction controller, is a microprocessor controller designed to automate the control of process variables within a water treatment system. Sophisticated electronics and state of the art control algorithms ensure that optimum process control is maintained at all times, with minimal operator intervention.

THIS PRODUCT IS NO LONGER AVAILABLE Electropneumatic positioner for pneumatically actuated control valves. Control Air Sockets: G 1/4, NPT 1/4; RC 1/4 on request. Supply Pressure: 3 to 7 Bar. Flow Capacity: 100 l/min

Electropneumatic positioner for pneumatically actuated process valves. II (1) 2 G EEx ia IIC T6 approval. PROFIBUS PA.

Fully compatible with Phoenix Inline System, Combination of Fieldbus, pilot valves and I/O modules, High flexibility, Compact design, High flow rate.

Fully compatible with Rockwell Point I/O System, Combination of Fieldbus, pilot valves and I/O modules, Compact design, High flow rate Fully compatible with Rockwell Point I/O System, Combination Fieldbus, pilot valves and I/O modules, High flow rate

Compact stainless steel design, Graphic display with backlight, Easy start-up, Comprehensive range of additional software functions, Internal control air channel, Profibus DPV1 or DeviceNet (option).

Compact stainless steel design, Graphic display with backlight, Easy start-up of process controller and positioner, Comprehensive range of additional software functions.

Bypass MFM with capillary technology for nominal flow rates from 5 mlN/min to 10 lN/min. Applicable for aggressive gases. Fieldbus option.

Accuracy 0.3% OFS (0.1%Repeatability), Neutral gas applications, Max Pressure 10bar, PROFIBUS DP & DeviceNet communication.

High dynamic flow measurement. Applicable for liquid flow measurement up to 600 ml/min (36 l/h). No moving parts in medium. Fieldbus optional. Compact version.

Accuracy 0.3% OFS (0.1% Repeatability), Liquids, Max Pressure 10bar, Max Flow 600mL/min.

High dynamic flow measurement. Applicable for liquid flow measurement up to 600 ml/min (36 l/h). No moving parts in medium. Fieldbus optional.

Accuracy 0.3% OFS (0.1% Repeatability), Aggressive & Toxic Gases, Max Pressure 10bar, Max Flow 10L/min.

High dynamic control through fast flow measurement. Applicable for liquid dosing up to 600 ml/min (36 l/h). No moving parts in medium. Fieldbus optional.

The flow rate controller, Type 8750, is a system to measure and control gases using the differential pressure principle. The reliable and robust system consists of an ELEMENT continuous control valve, Type 2301, with the compact process controller Type 8693 and two pressure transmitters, Type 8323.

Compact metal housing. Graphic display with backlight. Easy start-up. Comprehensive range of additional software functions. Profibus DPV1 (optional). Assembly acc. to IEC 534-6 / VDI VDE 3845.