Looking for a specific part?
Burkert
Ports: 3/8' to 1'. Body Material: Brass, stainless steel. Seal Material: FKM, others on request. Max P: 10 Bar. Control valve for continuous control of liquids. Low hysteresis and high repeatability. Control with PWM signal.
Port connection 1/4', Pressure range 2-8, Media temperature -10 up to 50°C, Pilot operated.
Ports
Threaded port -
DN 8 & 9 Ports 1/4' BSP or NPT. Body Polyamide. Seals- NBR, NBR and PUR. Electrical connection With cable (3m length). Volts 24, 110, & 230 V/UC. Duty cycle 100% continuously rated. IP65. II 2G EEx m II T 5 PTB 00 ATEX 2129X II 2DIP 65T 100°C.
Electrical 3mt moulded cable or terminal box. Port connections Threaded port
Ports port
Port connection 1/4' and NAMUR flange, Flow rate 900 (I/min), Valve body Polyamide (PA), With NAMUR adapter plate.
Body-Brass/stainless steel. Ports
Inline MFM for nominal flow rates from 25 lN/min to 1,500. lN/min; 1/4' to 3/4'. High accuracy. Fast response time. Fieldbus option.
Accuracy 0.3% OFS (0.1% Repeatability), Neutral gas applications, Max Pressure 10bar, Max Flow up to 1500l/min.
Flowmeter for gases and installation in existing pipes, depth scale for accurate installation, from 1/2" up to 12" (DN300), up to 44030 Nm3/h, 4-20 mA output signal
Flowmeter for gases, integrated inlet and outlet pipes, up to 2", up to 825 Nm3/h, 4-20 mA output signal
On/Off Control, Relay Output, Easy Setup.
4-20mA standard output signal, Pulse output (NPN, PNP or reed), Local flow display, 2 totalizers display, 2 programmable thresholds.
Pipe diameter DN 15-50, Measuring range 0.3-10m/s, Measuring error, Output signal Transistor PNP and NPN, Supply voltage 12-30 VDC, Enclosure IP 65, Fluid temperature maximum 0°C to +100°C.
Pipe diameter DN 15-DN 50, Measuring range 0.2m/s-10m/s, Switching accuracy +/-1%, Repeatability 0.4% o.R. Voltage supply 12-30 VDC, Fluid temperature max. 100°C.
Pipe diameter DN 15- 50, Measuring range 0.3 - 10 m/s, Measuring error +/-0.5%, Fluid temperature maximum 0C +100°C.
Paddle wheel technology (DN6 to DN65), Flow indication including 2 totalisers with optional alarm relays, 4-20mA and calibrated pulse output, Available as compact version with options for remote mounting.
Working as a transmitter and/or as an ON/OFF controller, Automatic calibration of full scale: TEACH-IN, Clean in place (CIP), FDA approved.
Measuring range 0.05 - 10 m/s, Repeatability =/-0.25% o.R. Display 8-digit LC-display, Fluid conductivity > 20 uS, Fluid temperature maximum 0 to 80°C, Sensor material Body in PVDF electrodes Stainless Steel.
DN 3 up to DN 100, Measuring range 0-10 l/h, 0-280 m3/h, Accuracy +/- 0.2%. Process connection DIN 11851, Tri-Clamp, Threaded ISO 228-1 and NPT, Flanged DIN 2501, ANSI 150 RF. Body materials: Stainless steel, Carbon Steel. Lining PTFE or PP
Pipe diameter DN 3- 100, Measuring range 00…10 l/h to 0…28 m3/h Measuring error +/-0.2%, Fluid temperature maximum 0C +100°
High accuracy. Medium with high viscosity. Mounting and dismounting of the sensor head by a quarter-turn. Connection to Burkert devices in remote versions.
For highly viscous fluids. Electronics for indication, monitoring, transmitting, On/Off. control and batch control.
Indication, monitoring, transmitting and On/Off control in one device. Programmable outputs (transistor or relay). Automatic-calibration: Teach-In. Communication - external setpoints and process value (4-20 mA).
Brass with Silicone Seals PPS, Sizes - DN15 - DN25, Connection - BSP or NPT External thread 3/4', 1' or 1 1/4'.
Pipe diameter DN 0.8- 80, Measuring range 0.3 - 10 m/s, Measuring error 10% of full scale up to full scale: ±0.4% of the measured value Fluid temperature maximum 0C +100°C.
The Type 8136 is a non-contact radar level transmitter for continuous level measurement. This unit is available in two versions: One with encapsulated horn antenna which is particularly suitable for level measurement of aggressive liquids in small vessels. The other with a plastic horn antenna particularly suitable for flow measurement in open flumes or gauge measurement in waters.
The Type 8137 is a non-contact radar level transmitter for continuous level measurement. The unit is available in two versions: - with thread and horn antenna (ø 40 mm) particularly suitable for use in small tanks and process vessels for measurement of practically any product. Also with flange and horn antenna (ø 40 or 75 mm) particularly suitable for use in storage tanks and process vessels for measurement of products such as solvent, hydrocarbons and fuels under extremely difficult process conditions.
What Burkert Products Do We Supply?
We supply a large number of Burkert products including -
- Burkert Solenoid Valves
- Burkert Control Valves
- Burkert Process Valves
- Burkert Flow Meters
- Burkert Flow Sensors
- Burkert Flow Transmitters
Whatever industry you work in be it Hygienic Processing, Gas Handling, Water Treatment or more, Fine Controls has got it covered.
All our Burkert products have been hand-selected for their reliability and longevity, and they are all available at a competitive rate.
Why Do We Supply Burkert Products?
There's a reason why we choose to distribute Burkert products. The firm stands for quality and expertise and they manufacture comprehensive products around the world in over 35 countries.
Their global presence ensures that all stockists receive full service and support and the brand is continually seeking new technologies to offer you, the customer, the very best solutions.
What's more, Burkert's research and development investment are one of the highest in the industry which means they strive to deliver the most sophisticated systems and comprehensive fluid control technology.
Get peace of mind that you are getting the very best service at the very best price with Fine Controls. For expert knowledge on any of the products, call the leading Burkert Distributors today on 0151 343 9966