Looking for a specific part?
Accessories
Alcon offer a range of Solenoid coils for general purpose applications. Standard versions and Hazardous versions available. Which can be supplied fitted to most valves with in the Alcon range.
The MCX5 capsule gauge is designed for low and negative pressure measurements and is particularly convenient for measuring pressure on ...
Type 8905 Online Analysis System is a modular system for monitoring all important water parameters on one platform. The Type 8905 is a multichannel multifunction unit for the Bürkert sensor cubes and electronic modules from the EDIP platform. The efficient device integration platform (EDIP) allows the high flexibility by using modularity in the hardware as well as in the software of the system
Pressure range 0-10 bar, Temperature media -10°C to +/- 100°C, Banjo bolt Brass, nickel plated, Seal material FPM.
Time range: 0.5s-10 s up to 0.5 h-10 h, Adjustment: 4 Function and time range via DIP switches, precision adjustment via potentiometers Operating voltage: 12-24 DC; 24-48 VDC/AC 50-60Hz; 110-230 V DC/AC 50-60Hz;
Input fuel impulse. Input diesel detection. PWM-outputs for control of proportional valve.
Installation width 16 mm, Protection class IP 65, Numerous variants, Also available with moulded-on cable connection, Contact form 8 mm.
Complete program, Contact form 18 mm, Also available with LED indicator, Optional 4-pin version for pressure switch or impulse valves respectively, Versions with high-power, power reduction and inverter for impulse valves.
ASI versions acc to DIN 43650, Form C and A, Optional versions with LED, rectifier and varistor. Easy and fast electrical installation.
2510: according to DIN 43650, Form C. 2512: according to DIN 43650, Form A.
Port size 1/8' - 1/4' Pressure range 0-10 bar Body material Brass or PA Seal material FKM
Pressure 0-16bar Ports DN1.5-DN2.0. Seals FPM. Body Polyamide/brass. Seal FPM(Viton). Electrical con. With cable/terminal box. Neutral gases. Voltage 24, 110, and 230 V/UC. Duty cycle 100% continuous rated. EEx-m-II T4 / T6 and EEx-me-II T4/T6.
Microprocessor-controlled electronics. Switchable standard input signal. Infinitely variable PWM frequency. Optional RS232 or RS485 interface.
Continuous 2point 3point & On/Off control. Ratio control function. Sensor inputs (4-20 mA, 0-10 V, frequency, RDT). Control of proportional process & motor valves. Burkert proportional valves and flow meters are memorized. 1/16 DIN size panel version
Display: LC graphic display, light blue backlit; 128x168 pixels resolution; German, English, French languages. Keypad: 4 soft keys [F1] [F2] [F3] [F4] for dynamic functions 1 central navigation key.
The mxCONTROL multifunction controller, is a microprocessor controller designed to automate the control of process variables within a water treatment system. Sophisticated electronics and state of the art control algorithms ensure that optimum process control is maintained at all times, with minimal operator intervention.
For all standard temperature sensors, Parameter strings can be copied, Simple handling, 2 rocker switches for setting parameters.
Enclosure Weatherproof grey epoxy coated steel plate. IP65 Dimensions 139 x 177 x 48mm Fixing Centres 102mm Electrical Entry 20mm conduit gland for cable diameter 7mm to 13mm Supply Voltage 24vDC Supply Load 11.7mA Volt Free Contacts Terminal (1&2) / (3&4) / (5&6) Contact resistive load 8 Amps Load Voltage (AC) 250vAC Load Voltage (DC) 30vDC Operating Temperature -25°C to +70°C Weight 0.6kg
Supply Ports 3/4' NPT on manifold ends. Outlet Ports 1/8' NPT vertically on the bottom.
Pre Filters available for removal of water and dirt particles up to 5 microns from air lines. Coalescing Filters available in 0.3 micron and 0.01 micron sizes for removal of 99.9% of oil mist. Operating pressure up to 150 psig. Port Size 1/4' - 1/2'.
Minimum supply pressure 50 psig. Maximum operating pressure supply 250 psig. Flow capacity 2.5 (SCFM) 100 psig supply, 30 psig set.
High flow capacity, precision regulator. Available in five pressure ranges. Sensitivity 0.125 Water Column.
Fairchild steel mounting bracket for use with Fairchild pressure regulators.
Fairchild gauges are designed for general use in applications that use gas or liquid media. Pressure ranges from 0-15 psig to 0-400 psig, 2" dial with 1/4" rear entry.
Fuseable links for use with Landon Kingsway Free Fall Fire Valve
316 Stainless Steel needle valve with 3mm or 6mm orifice. 316 Stainless Steel exhaust flow regulator/ breather supplied complete with tamper proof cap. 1/4', 3/8' 1/2' NPT and (BSP option).
Midland ACS mounting bracket for use with Midland ACS Air preparation units.