Siemens Ultrasonic Level Transmitters

Narrow beam angle of only 10°, Chemically resistant PVDF copolymer enclosure and CSM rubber face, Measuring range: 8 m (26 ft) for measurement of liquids and slurries. Fully submersible: IP68 degree of protection.

Measuring range up to 12 meters. Safe or hazardous area duty. ETFE or PVDF wetted parts. 4-20mA or profibus output. Ultrasonic Level Transmitter.

Integral temperature compensation, Low ringing effect reduces blanking distance, Optional foam facing for dusty applications, Self-cleaning and low maintenance, Chemically resistant, Hermetically sealed, Ultrasonic Level Transmitter.

Monitors wet wells, weirs and flumes. Digital communications with built-in Modbus RTU via RS-485. Compatible with SmartLinx system and SIMATIC PDM configuration software. Single or dual point level monitoring. 6 relay (standard), 1or3 relay (opt.)

Outputs for alarms, chart recorders, controllers and integration of existing systems. Monitors wet wells, weirs and flumes. Energy-saving function with built-in real-time clock. Special control mode to reduce grease rings and other deposits.

Single/dual point level monitoring. False-Echo Suppression for fixed obstructions. Noise reduction and improved signal-to-noise ratio. Level, volume & flow measurements in open channels, differential control, extended pump control and alarm functions

Range: 0.25 to 5 m (0.8 to 16.4 ft). Process temperature: -40 to 60°C (-40 to 140°F). Output: One relay, 4 to 20 mA (3-wire) or 4 to 20 mA (2-wire).

HydroRanger 200 HMI is an ultrasonic level controller for up to six pumps and provides control, differential control, and open channel flow monitoring

MultiRanger 200 HMI is a versatile short to medium-range ultrasonic single and multi-vessel level monitor/controller for virtually any application in a wide range of industries.