STATUS INSTRUMENTS CONNECTION HEADS FOR TEMPERATURE PROBES / SENSORS

• SCH 4
• SCH 5
• SCH 6
• SCH 11
• SCH 50

For complete technical information on the range of Connection Termination Heads please view the datasheet.

Contact us about this product

STATUS INSTRUMENTS DM3400 - SMART DIGITAL INDICATOR

Designed without compromise, the DM3400 series uses leading edge technology to accept all commonly used temperature and process inputs. Engineering units are displayed on a high efficiency daylight readable LED display. The indicators can be used “standalone” or, using the Modbus serial communications “pod” as part of a larger system. The highly innovative case design features option “pods” which can be installed without dismantling or re-calibration. “Pods” include: Relay Output, Isolated 4-20mA Retransmission and RS485 Modbus Communications.

• Galvanically Isolated Input
• Thermocouple or Pt100 Input - DM3410
• Current or Voltage Input - DM3420
• Flexible Configuration using Option “Pods”
• Easily Re-programmed 

Contact us about this product

STATUS INSTRUMENTS DM3600 - INTELLIGIENT DIGITAL INDICATOR WITH TFML

The DM3600 is an intelligent digital panel meter that can accept inputs from a wide variety of sensors and display the signal digitally. In addition, it has the facility to accept up to two options ‘Pods’ which can be either isolated 4-20mA re-transmission or two normally open alarm relays. The DM3600 is available in two models: DM3600U which is a universal input panel indicator and DM3600A which is a universal panel indicator with totaliser functions. The DM3600 supports TFML (Transfer Function Module Library) ie. the ability to download custom functionality by means of standard modules available from the web site. This allows pre-written or custom control functions to be quickly and easily incorporated. 

• Universal input
• Flow Totaliser Functions
• 6 Digit Display
• Relay & Analogue Outputs

Contact us about this product

STATUS INSTRUMENTS DM500 - LOOP POWERED INDICATOR

DM500 is a loop-powered process indicator, designed to be connected in series in a 4-20mA current loop to display digitally the process variable represented by the current flowing. The circular stainless steel housing is available in a choice of depths, permitting the installation of a suitable loop-powered transmitter.

• Large 20mm LCD Display
• Stainless Steel Case
• IP65 Enclosure 

Contact us about this product

STATUS INSTRUMENTS DM600 - BATTERY POWERED INDICATOR

The DM600 series of battery powered indicators accepts either an RTD (DM640P) or a thermocouple (DM640TC) input. Each device shows the temperature on a 4 digit LCD display.

• BATTERY POWERED

• RTD OR TC INPUT OPTIONS

• PUSH BUTTON CONFIGURABLE

• 4 DIGIT DISPLAY

• HOUSING ABS PLASTIC OR STAINLESS STEEL

• SEALED TO IP67

• 10 YEAR WARRANTY

• ATEX APPROVED IN ABS HOUSING 

Contact us about this product

STATUS INSTRUMENTS DM640 - BATTERY POWERED THERMOMETER

The DM600 series of battery powered indicators accepts either an RTD (DM640P) or a Thermocouple (DM640TC) input. Each device shows the temperature on a 4 digit LCD display.

• Suitable For Use With Pt100 or Thermocouple Temperature Probes

• Push button configurable

• Sensor, Remote or Wall Mounted versions

• 4 digit display

• Sealed to IP67

• Atex approved in ABS housing

Contact us about this product

STATUS INSTRUMENTS DM660 - BATTERY POWERED THERMOMETER

The DM660 is a development of the DM640 battery powered indicator and provides a high accuracy digital readout from an RTD sensor. The mounting of the instrument in the larger 100mm 'Dial Gauge' enclosure enables 20mm high digits to be used providing good readability from 20 meters. Probe entry thread is M16 x 1.5mm.

• Suitable for Pt100,Ni100,Cu53,Cu100 temperature sensors

• 20 mm LCD Display for good readability

• Sensor, Wall or Panel Mount Housing Options

• Stainless Steel Construction (100 mm diameter)

• IP65 Enclosure

Contact us about this product

STATUS INSTRUMENTS DM700 - LOOP POWERED INDICATOR

The DM700 series is a family of Loop Powered Indicators which incorporate a high efficiency LED display. ATEX versions are available for use in hazardous areas.

• (4 TO 20) mA LOOP POWERED

• 4 DIGIT LED DISPLAY

• 10 YEAR WARRANTY

• CUSTOM LINEARISATION

• FULLY PROGRAMMABLE BY PUSH BUTTONS

• ATEX APPROVAL 

Contact us about this product

STATUS INSTRUMENTS DM720 - PANEL MOUNTED LOOP POWERED INDICATOR

The DM720 is a compact panel mounted loop powered indicator that is designed to connect in series with a 4/20mA current loop and display the value in engineering units. The DM720 is housed in a 48x24mm DIN standard panel mount case and provides 10mm high LED digits . The engineering range is programmed by using easily accessible push buttons. The design of the product means no external power supply is needed and it requires less than 5V from the current loop.

• Push button configurable

• Compact 48 x 24mm

• Loop powered

• 4 digit LED display

• IP65 front panel seal

Contact us about this product

STATUS INSTRUMENTS MED2911 - HIGH PERFORMANCE DIN RAIL POWER SUPPLY

The MED 2911 is a high performance switch mode power supply which is very small and compact for the power it delivers and which complements our range of DIN rail transmitters and Medacs signal conditioning units. It connects to the mains supply and provides an isolated 24 VDC supply @ 1A.

• 90 to 240V AC Supply Voltage

• 24VDC @ 1 Amp Output

• Can Power Up To 40 2 wire 4 to 20mA Loop Powered transmitters

• UL, CE and CSA approved

• Isolated to 3 kV

Contact us about this product