BURKERT TYPE 8400 - TEMPERATURE SENSOR/SWITCH

This temperature sensor/switch is specially designed to switch a valve and establish an ON/OFF control loop. The switching point can be programmed with the 3 key pads on the display or can optionally be programmed externally from a programmable logic controller over 4-20 mA loop. The connection to the process in the piping is done with standard fittings.

• Measuring range -40°F to 257°F
• Switching range +/-1.0°F
• Repeatability 0.4%
• Sensor element Pt100, Wetted parts: stainless steel

• Voltage Supply: 12...30 VDC
• Transistor or Relay Output

Contact us about this product

SIEMENS SITRANS TF - FIELD TEMPERATURE TRANSMITTER

SITRANS TF is used where other transmitters can't cope. One main point is its rating of IP67. SITRANS TF is made of rugged die cast aluminum or long-lasting stainless steel. It transforms resistance thermometers, thermocouples, Ohm and mV signals into a load independent DC current corresponding to sensor characteristic or a digital signal according Fieldbus standard Profibus PA or Foundation Fieldbus. The remote mounted sensor prevents the transmitter heating up at high temperature; there are no vibrations and oscillations due to long neck tubes and protective pipes with SITRANS TF.

For tags with difficult access to you can mount your SITRANS TF remotely at easily accessible places and display the measured value on the freely programmable digital display (with version 4 to 20 mA). You can even use the SITRANS TF in a version without a transmitter as a comfortable field display unit for all 4 to 20 mA signals.  All SITRANS TF are available in intrinsically safe or explosion proof version

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources

• Output: 4 to 20 mA, 4...20 mA with HART, Profibus PA or Foundation Fieldbus

Contact us about this product

SIEMENS SITRANS TR200 - DIN RAIL TEMPERATURE TRANSMITTER

SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources

• Output: 4-20mA

Contact us about this product

SIEMENS SITRANS TR300 - DIN RAIL TEMPERATURE TRANSMITTER

SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4-20mA loop the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources

• Output: 4-20mA

Contact us about this product

SIEMENS SITRANS TW - DIN RAIL TEMPERATURE TRANSMITTER

SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM. Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum. All SITRANS TW control room devices are available in non-intrinsically safe versions and intrinsically safe versions for applications under extreme conditions.

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current Sources

• Output: 0/4 to 20 mA, HART or 0/2 to 10 V, HART

Contact us about this product

SIEMENS TH300 HART - IN HEAD TEMPERATURE TRANSMITTER

SITRANS TH300 with HART- protocol is designed to support all common thermocouples, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4..20mA loop the output current can read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
• Output: 4 - 20 mA, HART
• Alarm signal for sensor break or short-circuit according NAMUR 43
• Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21

Contact us about this product

SIEMENS TH400 PROFIBUS/FIELDBUS - IN HEAD TEMPERATURE TRANSMITTER

SITRANS TH400 is available either with PROFIBUS PA or FOUNDATION Fieldbus (FF). It is designed to support all common RTD, thermocouple, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM(PA) or AMS and handheld communicator(FF). Due to it small size, the device allows flexible mounting options, even in a DIN Type B connection head.

• Input: Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
• Output: PROFIBUS PA (variant), Foundation Fieldbus (variant)
• Explosion-protection for US, Canada and Europe
• Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21

Contact us about this product

STATUS INSTRUMENTS SCH4 - CONNECTION TERMINATION HEAD

The SCH4 series of probe connection heads has a wide range of entry sizes and positions. The head will accept standard connecting blocks and most standard head mounting transmitters. Moulded in general purpose ABS, the external fixing points provide a simple and rapid means of mounting sensors directly onto ducts, dispensing with the need for separate mounting plates.

• Multi entry
• Houses One or Two Transmitters
• Sealed to IP67
• Digital Display Option 

Contact us about this product

STATUS INSTRUMENTS SEM1603P - DIN RAIL MOUNTED TEMPERATURE TRANSMITTER

The SEM1603 series is a cost effective DIN rail mounted temperature transmitter from Status Instruments. The range consists of two versions, the SEM1603P accepts PT100 inputs, the SEM1603TC accepts seven common thermocouple types plus mV input.

• CONFIGURATION USING USB PORT POWERED CONFIGURATOR

• PT100 or THERMOCOUPLE / mV

• ISOLATED INPUT

• INPUT LINEAR TO TEMPERATURE

• (4 to 20) mA TWO WIRE OUTPUT

• 10 YEAR WARRANTY 

Contact us about this product

STATUS INSTRUMENTS SEM1610 - DIN RAIL TEMPERATURE TRANSMITTER

The SEM1610 is the new generation DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

• SIMPLE CONFIGURATION VIA USB PORT

• UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input

• ISOLATED INPUT

• PUSH BUTTON USER TRIM

• (4 to 20) mA TWO WIRE OUTPUT

• 10 YEAR WARRANTY 

Contact us about this product