Fine Controls (UK) Ltd

ALCON 67 SERIES - STAINLESS STEEL EEx ed PILOT VALVE

The Alcon Solenoid valves 67 series are a fully st/st design in both 3/2 & 5/2 function with single or dual solenoid operation. The fully st/st designs make them ideal for off shore and heavy duty applications. With valve bodies ported in ¼” or ½”bsp and a choice of cable entries.

• Fully st/st design
• 3/2 & 5/2 Functions
• Choice of Seal materials
• Ideal of off shore applications

Contact us about this product

ALCON 70 SERIES - STAINLESS STEEL EEx ed SOLENOID VALVE

The Alcon 70 Series hazardous area solenoid benefits from stainless steel construction as standard, manual override and reset options. The valve has been designed for actuator control and low power consumption, and is zero pressure rated.

• Fully st/st design

• Ambient Temperature: -20°C to +40°C

• 3/2 Closed, Open & Universal functions

• IP67 rated

Contact us about this product

BURKERT TYPE 6013 EEx m - 2/2 WAY HAZARDOUS AREA SOLENOID VALVE

The Burkert type 6013 solenoid valve is available to ATEX standards EExem II T4 2G II2 D. With a brass body and viton seals as standard this direct acting Hazardous area solenoid valve is manufactured with the option of either a certified electrical junction box or with 3mt integral cables.  

• Pressure range 0 – 10 bar , Suitable for technical vacuum

• Port Connections Threaded port G 1/8“ – G 1/4“

• Operating voltages 24, 110, 230 V/UC

• Duty cycle 100% continuously rated

• Rating IP65

• Approvals EEx m II T4 with moulded cable & EEx me II T4 with terminal box

Contact us about this product

BURKERT TYPE 5281 EEx m - 2/2 WAY HAZARDOUS AREA SOLENOID VALVE

The type 5281 valve hazardous area solenoid valves are manufactured with a brass body and Buna diaphragm as standard, with options for EPDM or viton. Suitable for pipe sizes from DN15 –DN65 these 2 way normally closed valves meet EEx em IIT4II2d standards and are avalible with 3mt cables or Junction box.

• Pressure range 0.2 – 10 bar

• Port Connections Threaded port G1/2“ – G21/2“

• Operating voltages 24, 110, 230 V/UC

• Duty cycle 100% continuously rated

• Rating IP65

• Approvals: EEx m II T4 with moulded cable & EEx me II T4 with terminal box

Contact us about this product

BURKERT TYPE 5282 EEx d - 2/2 WAY HAZARDOUS AREA SOLENOID VALVE

The type 5282 valve hazardous area solenoid valves are suitable for pipe sizes from DN15 –DN65. These 2 way normally closed or Normally open valves meet EEx ed IIC T5 II2G standards and are avalible with 3mt cables or Junction box. Manufactured in brass body or Stainless steel with Viton diaphragm as standard and options for EPDM or Buna. A manual override and isolating diaphragm is standard feature on this valve range.

• Pressure range 0.2 – 10 bar

• Port Connections Threaded port G1/2“ – G21/2“

• Orifice DN 13 up to 65 mm

• Operating voltages 24, 110, 230 V/UC

• Duty cycle 100% continuously rated

• Rating IP65

• Approvals: EEx m II T4 with moulded cable & EEx me II T4 with terminal box

Contact us about this product

BURKERT TYPE 6014 EEx m - 3/2 WAY HAZARDOUS AREA SOLENOID VALVE

Suitable for Neutral gases and fluids as e.g. compressed air, town and natural gas, water, hydraulic oil Type 6014 hazardous area solenoid valve is manufactured in 3/2 Normally closed or Universal functions. With option for Brass, Stainless steel or Polyamide bodies this valve range can be supplied with 1/8” or ¼” threaded ported or Subbased mounted.  Conforming to EExm II T4, T5 and T6 this general purpose explosion proof valve can be supplied with Junction box or 3mt cables. 

• Pressure range: 0-10 bar max. Technical vacuum

• Port connection G 1/8, G 1/4 and Sub-base connection

• Block mounted T4: -30 up to +40 °C

• Operating voltages 24, 110, 230 V/UC

• Power consumption T4 coil T4 coil T5 coil T6 coil

• Duty cycle 100% continuously rated

• Rating IP 65

• Ex-approval EEx-m-II T4, T5 and T6 or EEx-me-II T4, T5 and T6

Contact us about this product

BURKERT TYPE 780 EEx ed - 3/2 WAY HAZARDOUS AREA SOLENOID VALVE

The type 780 direct acting 3/2 way universal function solenoid valve is manufactured with a pivoted armature as the switching method.  This unique valve design hermetically isolates the actuator from the fluid. It provides a long service life, even in unlubricated applications. Designed to meet ATEX standards to EEX-ed IIC T5 the type 780 valve is  manufactured in both Stainless steel and brass with a choice of seal materials.

• Body Materials -Brass or stainless steel

• Port Sizes: ¼” or sub base mounted

• Seal materials – NBR or FKM

• Operating voltages 24, 110, 230 V/UC

• Duty cycle 100% continuously rated

• Cycling rate approx. 30 c.p.m.

• Rating IP 65

• EX approval - II 2G EEx-ed-IIC T5 PTB03 ATEX 1030X

Contact us about this product

BURKERT TYPE 6518/6519 EEx m - 3/2 & 5/2 WAY HAZARDOUS AREA SOLENOID VALVE

Designed in a corrosive resistant Polyamide plastic the Type 6518/6519 Hazardous are solenoid valves are ideal for use in outside or aggressive atmospheres. Avalible in 3/2, 5/2 or 5/3 functions these ¼” ported valves can be used as independent valves or manifold mounted. Suitable for compressed air or neutral gases they conform to ATEX standards EEXm II T5 II 2G. These explosion proof valves can be supplied with Junction box or 3mt cables.

• Threaded port  - ¼” bsp or NPT

• Electrical connection -3 mt moulded cable or Terminal box

• Protection class -  IP65

• Approval II 2G EEx m II T 5 PTB 00 ATEX 2129X II 2DIP 65T 100°C

• Operating voltage - 24/110/230 V/UC

Contact us about this product

BURKERT TYPE 6518/6519 EEx ia INTRINSICALLY SAFE - 3/2 & 5/2 WAY HAZARDOUS AREA SOLENOID VALVE

Designed in a corrosive resistant Polyamide plastic the Type 6518/6519 hazardous area solenoid valves are ideal for use in outside or aggressive atmospheres. Avalible in 3/2 or 5/2 functions these ¼” ported valves can be used as independent valves or manifold mounted. Suitable for compressed air or neutral gases they conform to ATEX standards EExia IIC T6.

• Electrical Connection Din Plug

• Port connections Threaded port ¼” bsp or NPT

• Orifice DN 8.0

• Body materials Main valve Polyamide

• Thread insert material Brass

• Seal Materials NBR, NBR and PUR

• Operating voltages 24VDC

• Ambient temperature -25 to +50°C

• Duty cycle 100% continuously rated

• Rating IP65

• Approvals II 2G EExia II T6 PTB 01 ATEX 2101 II2D Exia D21 T80c

Contact us about this product

BURKERT TYPE 5470 EEx ia - MANIFOLD MOUNT HAZARDOUS AREA SOLENOID VALVE

The type 5470 intrinsically safe solenoid valve EEx ia 2 CT6 is supplied as a manifold mountable valve which allows for up to 22 valves to be mounted on a manifold. This rocker principle solenoid valve offers high performance and long life service making it ideal for high cycling applications. With manual override as standard and the option for either threaded or 6mm push-in connections this valve series offers a very versatile option when looking for ATEX intrinsically safe certified valves in either 4/2 or 3/2 functions.

• Pressure range 2-8 bar max

• Port connections G 1/8 and 6mm push in

• Orifice DN 13 up to 65 mm

• Body materials Polyamide

• Max. ambient temp Single valve T6 -10 up to +50 °C

• Operating voltages 24 VDC

• Duty cycle 100% continuously rated

• Rating IP65

• Approvals ATEX EExia IIC T6

Contact us about this product