STATUS INSTRUMENTS SEM1300 - DIN RAIL MOUNTED POWER SUPPLY

The SEM1300 is a DIN Rail mounted power supply that provides a regulated 24V DC output @ 250 mA from an AC supply ranging from (90 to 253) VAC (50 to 60) Hz.Ideally suited to powering 24 V process instrumentation and signal conditioning modules, the small size of the SEM1300 now enables many more units to be installed in a smaller space than was previously possible.

• Small Size
• Universal Input Supply
• High Packing Density
• Cool Running 

Contact us about this product

STATUS INSTRUMENTS SEM1630 - UNIVERSAL DIN RAIL TRANSMITTER

The SEM1630 is the new generation DIN rail mounted temperature amplifier from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a dual trip output.

• SIMPLE CONFIGURATION VIA USB PORT

• UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input

• ISOLATED INPUT

• DUAL RELAY OUTPUTS 250 V AC 1A

• RELAY ISOLATED FROM EACH OTHER

• 10 YEAR WARRANTY

Contact us about this product

STATUS INSTRUMENTS SEM1620 - UNIVERSAL INPUT, 3 WIRE VOLTAGE OUTPUT SIGNAL CONDITIONER

The SEM1620 signal conditioner provides a 3 wire isolated voltage output signal and accepts RTD, Thermocouple, mV and passive current sensor inputs. It has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1620 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. 

• Pt100,Thermocouple,mV,mA Input

• (0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Output choices

• Push Button User Trim For In Process Fine Tuning

• Galvanic Isolation

Contact us about this product

STATUS INSTRUMENTS MED2911 - HIGH PERFORMANCE DIN RAIL POWER SUPPLY

The MED 2911 is a high performance switch mode power supply which is very small and compact for the power it delivers and which complements our range of DIN rail transmitters and Medacs signal conditioning units. It connects to the mains supply and provides an isolated 24 VDC supply @ 1A.

• 90 to 240V AC Supply Voltage

• 24VDC @ 1 Amp Output

• Can Power Up To 40 2 wire 4 to 20mA Loop Powered transmitters

• UL, CE and CSA approved

• Isolated to 3 kV

Contact us about this product

STATUS INSTRUMENTS SEM1401/SEM1402 - LOOP POWERED TRIP AMPLIFIER

The SEM1402 is a loop powered trip amplifier designed to accept a standard (4 to 20) mA signal from an existing current loop and provide two individual trip outputs sharing the same common. Utilising the existing loop power means that no separate supply is required to power the trip alarm with resulting cost reductions and simplified wiring. The small size and the mains line relay contact make this the ideal choice for many trip alarm applications.

• 2 x Mains rated relays (SEM1402)

• 1 x Main rated relay (SEM1401)

• Loop Powered

• Trip State LED Indication

• Active High or Low

Contact us about this product

STATUS INSTRUMENTS SEM1700 - UNIVERSAL POWERED SMART SIGNAL CONDITIONER

The SEM1700 is a  DIN rail mounted universal signal conditioner. It accepts RTD, Thermocouple, Voltage, Current and Potentiometer sensor inputs and provides the user with a programmable current or voltage output signal plus dual trip relays. Isolation is provided between input, outputs and supply. All temperature ranges are linear to temperature. Both input and output loop excitation is provided as well as a fully universal power supply. Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1700 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1700 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

• Rtd, Thermocouple, mV, V, mA and Potentiometer Input

• Isolated Universal Voltage or Current Output

• Dual C/O Relay Trip Outputs

• Universal Power Requirement 22to 250V AC or DC

• Powers both input and output current loops

• Simple Configuration Via USB Port

Contact us about this product