STATUS INSTRUMENTS SEM1000 - 4-20mA LOOP ISOLATOR

The SEM1000 isolator is designed to be series connected into a new or existing 4-20mA current loop and provide an isolated 4-20mA signal capable of driving into 500 ohm. The output is powered from the input loop.

• Small Size
• Signal Conversion
• High Accuracy
• Galvanic Isolation

Contact us about this product

STATUS INSTRUMENTS SEM1010 '" ISOLATOR

The most common use of the SEM1010 is to provide isolation between a field mounted, two wire, 4-20mA transmitter and a PLC type device with a common power supply. The two wire transmitter connected to the input terminals of the SEM1010 does not require a power supply connected to the output terminals.

• Small size
• Signal Conversion
• High Accuracy
• Galvanic Isolation
• High Reliability 

Contact us about this product

STATUS INSTRUMENTS SEM1015 - 4-20mA LOOP ISOLATOR

The SEM1015 is a 4-20mA isolator that can be configured to accept most of the common voltage ranges found in both commercial and industrial applications. The isolator is housed inside a plastic enclosure, suitable for Din Rail mounting. Screw terminals are provided for wire connections.

• Small Size
• Signal Conversion
• Galvanic Isolation
• High reliability 

Contact us about this product

STATUS INSTRUMENTS SEM1020 - 4-20mA LOOP ISOLATOR

The SEM1020 is a low cost isolator requiring power supply connections on both the input and output terminals. The most common use for the SEM1020 is to provide extra drive capabilities from an existing 4-20mA current loop.

• Small size
• Signal Conversion
• High Accuracy
• Galvanic Isolation 

Contact us about this product

STATUS INSTRUMENTS SEM1200 - DUAL OUTPUT ISOLATOR

The SEM 1200 isolator is a dual output isolator, providing two separate isolated (4 to 20) mA current signals from a primary loop.

• Two (4 to 20) mA Outputs

• Galvanic Isolation 500 V DC Flash Tested 1 KV

• High Accuracy 0.05%

• 12.5 mm Wide

• 10 YEAR WARRANTY

Contact us about this product

STATUS INSTRUMENTS SEM1100 - POWERED ISOLATING CONVERTOR

The SEM1100 is a powerful isolating convertor that accepts most common high level process signals (current and voltage), isolates them electrically and physically and converts them to any other process signal. It is also possible to have voltage and current outputs simultaneously from a single input.

• High Accuracy 0.05%
• Powers Both Loops
• Drives Current Into 1K Ohm
• 3 Port Galvanic Isolation
• Din Rail or Surface Mount 

Contact us about this product