SIEMENS SITRANS RD500 - REMOTE DATA LOGGER

The SITRANS RD500 is a remote data manager providing integrated web access, alarm event handling, and data capture for instrumentation.The RD500 is an easy-to-use remote data manager, using a web-based application and hardware modules. The unique modular approach allows a variety of process signals to be monitored, while the serial ports allow data to be collected from any Modbus RTU device.The RD500 comprises a master communications module, and up to 16 slave modules. Various module types are available, allowing up to a maximum of 128 conventional inputs and outputs. The RD500’s serial ports can collect data from up to 247 Modbus RTU slave devices including field instruments.The RD500's built-in web server, FTP, and email client allows the process to be monitored remotely. Alarm notifications are communicated through email and SMS text messages to one or more recipients to ensure that appropriate actions are taken by personnel.The RD500 supports external modems, providing flexibility for applications in which GSM/GPRS cellular or landline connectivity is desired.The RD500 is configured via a web-based interface - a standard browser is all the software you need to configure your system. 

Contact us about this product

STATUS INSTRUMENTS MED2911 - HIGH PERFORMANCE DIN RAIL POWER SUPPLY

The MED 2911 is a high performance switch mode power supply which is very small and compact for the power it delivers and which complements our range of DIN rail transmitters and Medacs signal conditioning units. It connects to the mains supply and provides an isolated 24 VDC supply @ 1A.

• 90 to 240V AC Supply Voltage

• 24VDC @ 1 Amp Output

• Can Power Up To 40 2 wire 4 to 20mA Loop Powered transmitters

• UL, CE and CSA approved

• Isolated to 3 kV

Contact us about this product

STATUS INSTRUMENTS MEDACS - DIN RAIL SIGNAL CONDITIONING WITH TFML

The MEDACS Series II is a totally new concept in DIN rail signal conditioning and consists of a family of DIN rail modules, each on having a high degree of functionality and configurability via a RS485 MODBUS serial communications interface. They accept all common signals and produce an isolated 4-20mA re-transmission signal, a single changeover trip relay, twin normally open relays or various combinations. The functionality is further enhanced by the inclusion of a Transfer Function Module Library (TFML) which enables complex transfer functions to be loaded into the device. These can be PID control, tank linearization curves, signal accumulators, max and min data logging etc. all of which can be downloaded.

• Smart Configurable
• Single or Dual Channel
• Galvanic Isolation
• Universal or Frequency Input
• Easily customised Via TFML 

Contact us about this product

STATUS INSTRUMENTS SEM1000 - 4-20mA LOOP ISOLATOR

The SEM1000 isolator is designed to be series connected into a new or existing 4-20mA current loop and provide an isolated 4-20mA signal capable of driving into 500 ohm. The output is powered from the input loop.

• Small Size
• Signal Conversion
• High Accuracy
• Galvanic Isolation

Contact us about this product

STATUS INSTRUMENTS SEM1010 '" ISOLATOR

The most common use of the SEM1010 is to provide isolation between a field mounted, two wire, 4-20mA transmitter and a PLC type device with a common power supply. The two wire transmitter connected to the input terminals of the SEM1010 does not require a power supply connected to the output terminals.

• Small size
• Signal Conversion
• High Accuracy
• Galvanic Isolation
• High Reliability 

Contact us about this product

STATUS INSTRUMENTS SEM1015 - 4-20mA LOOP ISOLATOR

The SEM1015 is a 4-20mA isolator that can be configured to accept most of the common voltage ranges found in both commercial and industrial applications. The isolator is housed inside a plastic enclosure, suitable for Din Rail mounting. Screw terminals are provided for wire connections.

• Small Size
• Signal Conversion
• Galvanic Isolation
• High reliability 

Contact us about this product

STATUS INSTRUMENTS SEM1020 - 4-20mA LOOP ISOLATOR

The SEM1020 is a low cost isolator requiring power supply connections on both the input and output terminals. The most common use for the SEM1020 is to provide extra drive capabilities from an existing 4-20mA current loop.

• Small size
• Signal Conversion
• High Accuracy
• Galvanic Isolation 

Contact us about this product

STATUS INSTRUMENTS SEM1100 - POWERED ISOLATING CONVERTOR

The SEM1100 is a powerful isolating convertor that accepts most common high level process signals (current and voltage), isolates them electrically and physically and converts them to any other process signal. It is also possible to have voltage and current outputs simultaneously from a single input.

• High Accuracy 0.05%
• Powers Both Loops
• Drives Current Into 1K Ohm
• 3 Port Galvanic Isolation
• Din Rail or Surface Mount 

Contact us about this product

STATUS INSTRUMENTS SEM1200 - DUAL OUTPUT ISOLATOR

The SEM 1200 isolator is a dual output isolator, providing two separate isolated (4 to 20) mA current signals from a primary loop.

• Two (4 to 20) mA Outputs

• Galvanic Isolation 500 V DC Flash Tested 1 KV

• High Accuracy 0.05%

• 12.5 mm Wide

• 10 YEAR WARRANTY

Contact us about this product

STATUS INSTRUMENTS SEM1300 - DIN RAIL MOUNTED POWER SUPPLY

The SEM1300 is a DIN Rail mounted power supply that provides a regulated 24V DC output @ 250 mA from an AC supply ranging from (90 to 253) VAC (50 to 60) Hz.Ideally suited to powering 24 V process instrumentation and signal conditioning modules, the small size of the SEM1300 now enables many more units to be installed in a smaller space than was previously possible.

• Small Size
• Universal Input Supply
• High Packing Density
• Cool Running 

Contact us about this product