Fine Controls (UK) Ltd

SIEMENS MILLTRONICS SITRANS LVL 200 - VIBRATING LEVEL SWITCH

SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications. SITRANS LVL200 is a level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With a tuning fork insertion length of only 40 mm (1.57“), SITRANS LVL200 can be mounted in small pipes and applications with confined space

• Max pressure 64 BAR
• Max temperature 250°C
• Liquids and slurries  
• Vibrating Level Switch 

Contact us about this product

SIEMENS MILLTRONICS SITRANS LVS 200 - VIBRATING LEVEL SWITCH

The SITRANS LVS200 Level Switch is an electro-mechanical vibratory switch for level detection of powder and granular solids. The standard LVS200 detects high or low levels of dry bulk solids in bins, silos or hoppers. It is designed to ignore liquids in order to detect the interface between a solid and a liquid.

• Max pressure 10 BAR
• Max temperature 150°C
• Powders and granular solids
• Safe or hazardous area duty
• Vibrating Level Switch 

Contact us about this product

SIEMENS MILLTRONICS SITRANS LVL 100 - VIBRATING LEVEL SWITCH

SITRANS LVL100 is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined spaces. SITRANS LVL100 is a compact level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With an insertion length of only 40 mm (1.57“), SITRANS LVL100 can be mounted in small pipes and confined space applications. It is also virtually unaffected by the chemical and physical properties of the liquid. The LVL100 can also be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.

The tuning fork is piezo-electrically energized and vibrates at its mechanical resonance frequency of approximately 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.

• Range: 40 mm (1.5”) insertion

• Process Temperature: -40 to 150 °C (-40 to 302 °F)

• Process Pressure: -1 to 64 bar g (-14.5 to 928 psi g

Contact us about this product

SIEMENS MILLTRONICS SITRANS LVS 100 - VIBRATING LEVEL SWITCH

SITRANS LVS100 is a vibrating point level switch for bulk solids and detects high, low or demand levels of dry bulk solids in bins, silos or hoppers. SITRANS LVS100 has a compact design and can be top, side, or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition.

• Range: 170 mm to 2 m (6.7” to 6.5 ft)

• Process Temperature: -40 to 150 °C (-40 to 302 °F)

• Process Pressure: Up to 10 bar g (145 psi g)

Contact us about this product