BURKERT TYPE 8045 - ELECTROMAGNETIC FLOW METER

The 8045 Magmeter is an insertion flow meter for pipe sizes DN15-DN400. Typical applications are liquids having a conductivity > 20 uS. With sensor bodies in Brass, st/st, PVDF, PVC and PP

• Measuring range 0.05 - 10 m/s
• Repeatability =/-0.25% o.R.
• Display 8-digit LC-display
• Fluid conductivity > 20 uS
• Fluid temperature maximum 0 to 80°C
• Sensor material Body in PVDF electrodes Stainless Steel 

Contact us about this product

BURKERT TYPE 8055 - ELECTROMAGNETIC FLOW METER

This full bore magmeter with large graphic display is designed for applications with a minimum conductivity of 5uS/cm. Type 8055 can be programmed locally with 3 key pads or by computer with a serial interface RS485.

• Pipe diameter DN 3 up to DN 100
• Measuring range 0...10 l/h, 0...280 m3/h
• Accuracy +/- 0.2% (or range)
• Process connection DIN 11851 and Tri-Clamp, Threaded ISO 228-1 and NPT, Flanged DIN 2501, ANSI 150 RF
• Body materials: Stainless steel 304 - 1.4301, Carbon Steel
• Lining material PTFE or PP
• Voltage supply 90-265 VAC 

Contact us about this product

BURKERT TYPE 8041 - INSERTION MAGMETER

The flow meter 8041 has been designed for pipes with diameters ranging from DN 6 to DN 400 and liquids having a conductivity > 20 μS/cm. The transmitter is a magmeter made up of an electronic module and a stainless steel sensor. It is fitted with a 4-20 mA output, a pulse rate PLC output and a relay output.

• Working as a transmitter and/or as an ON/OFF controller

• Automatic calibration of full scale: TEACH-IN

• Clean in place (CIP)

• FDA approved

Contact us about this product

SIEMENS DANFOSS MAG 1100 - ELECTROMAGNETIC FLOW METER

The SITRANS MAG 1100 Mag Flow meter is designed for the general industry environment. The obstructionless performance of the MAG1100 is unaffected by the suspended solids, viscosity, and temperature challenges typically found in food and beverage processes.

• DN2 - DN100
• Wafer pattern
• Max temperature 200°C
• Choice of liner and electrode material
• Mag 1100 Mag Flow Meter 

Contact us about this product

SIEMENS DANFOSS MAG 1100 FOOD - ELECTROMAGNETIC FLOW METER

The MAG1100 Mag Flow meter is designed especially for the food and beverage industry. It was the first flowmeter to pass the EHEDG hygienic test and meets all sanitary standards.

• DN10 - DN100
• Hygienic to 3A and EHEDG standards
• Profibus, Modbus, Devicenet, Hart and CANOpen communication
• Local of remote mount display/transmitter
• Mag Flow Meter 

Contact us about this product

SIEMENS DANFOSS MAG 3100 - ELECTROMAGNETIC FLOW METER

MAG 3100 Mag Flow Meter is a flexible and comprehensive sensor program, which is deliverable in a wide range of sizes. In addition to the grounding electrodes offered on the standard version, measuring electrodes capable of withstanding the most extreme processes and various liners are also available. The fully welded construction provides a ruggedness that fits almost every flow application.

• Nominal Sizes ½” to 78”
• Measuring range 0 – 100 bar
• Enclosure ratings IP67 & IP68
• Temperature of medium -40 to 180°C
• Mag Flow Meter 

Contact us about this product

SIEMENS DANFOSS MAG 5000/6000 - ELECTROMAGNETIC FLOW TRANSMITTER

The MAG5000 Mag flow transmitter is a microprocessor-based transmitter engineered for high performance, easy installation, commissioning and maintenance. The transmitter is truly robust, cost-effective and suitable for all-round applications. The MAG 6000 is used for more demanding applications where you need the benefits of highly functional and accurate performance.

• Wall or rack mounted transmitter
• Digital display
• Choice engineering units
• 4-20mA/pulse output
• Mag Flow Transmitter 

Contact us about this product

SIEMENS DANFOSS MAG 6000I/6000I Ex d - ELECTROMAGNETIC FLOW TRANSMITTER

The MAG6000 Mag Flow Transmitter Industry and the MAG6000 MagFlow Transmitter Ex d Industry have been designed to meet the demands in the process industry. Both versions are based on a microprocessor with a built-in alphanumeric display in several languages. The transmitters evaluate the signals from the associated electromagnetic sensors and also fulfill the task of a power supply unit.

• ATEX certified
• Hart, Profibus, Modbus and CANOpen communication
• Local display
• 4-20mA/pulse outputs
• Mag Flow Transmitter 

Contact us about this product

SIEMENS DANFOSS MAG 5100 W WATER - ELECTROMAGNETIC FLOW METER

The MAG 5100W Mag flow meter water with its patented composite elastomer lining is suitable for all water applications such as ground water, drinking water, waste water, sewage or sludge applications.

• DN25 - DN1200
• Flanged process connections
• Max pressure 40 BAR
• Rubber liner with 316 stainless steel electrodes
• Mag Flow Meter 

Contact us about this product

SIEMENS SITRANS F M MAG 8000 - ELECTROMAGNETIC FLOW METER

The battery-operated SITRANS F M MAG 8000 / SITRANS F M MAG 8000 CT solution gives you the flexibility to install a reliable water flow meter virtually anywhere without sacrificing accuracy or performance. No mains power is required. The battery water flow meter complies with the custody transfer approvals MID and OIML R49 water meter standards and is specially engineered for stand-alone water applications such as abstraction, distribution network, revenue metering and irrigation.  Application Examples: Abstraction and distribution network, Revenue and bulk metering and irrigation.SITRANS F M MAG 8000 / MAG 8000 CT is available as a basic version for general water applications or an advanced version for more advanced functionality and information.

• Accuracy: 0.2% ± 2mm/s and 0.4% ± 2mm/s

• Operating Pressure: Max. 16 bar (Max. 150 psi)

• Power Supply: Battery pack 12-24 V AC/DC, 115-230 V AC

• Enclosure: IP67 (NEMA 4) IP68 (NEMA 6P)

• Approvals: WRAS, KTW, DVGW 270, ACS, Belagua, NSF/ANSI Standard 61, MID (EU), OIML R49, MCERTS Sira Certificate No. MC080137/00

Contact us about this product