BURKERT TYPE 1094 - ELECTRONIC CONTROLLER FOR VAPOUR RECOVERY

When a vehicle is filled with petrol, the petrol flowing into the tank displaces an equal volume of petrol vapour out of the tank. To prevent this petrol vapour escaping into the atmosphere, it must be siphoned off. In the solution offered by Bürkert this vapour extraction is achieved by applying a vacuum via an upstream proportional valve in the petrol pump reservoir tank. A suction pump transports the petrol vapour out of the vehicle tank and compresses it in the petrol pump feed tank. To prevent an overpressure in the feeder tank, the volume of petrol drawn and the sucked back petrol vapour must be balanced. The petrol quantity dispensed into the vehicle tank is measured using the calibrated piston meter of the petrol pump, the output signal of which is converted by a petrol pump computer into pulsed signals that are transmitted to the control unit. The control unit is fitted with a (SUB-D) port so that it can communicate (calibration, measurements) with the manual control unit.

• Input fuel impulse

• Input diesel detection

• PWM-outputs for control of proportional valve

Contact us about this product

BURKERT TYPE 8605 - CONTROL ELECTRONICS FOR PROPORTIONAL VALVES

The digital control electronics, Type 8605, serves to operate proportional solenoid control valves in the power range from 40 - 2000 mA. The electronics converts an external standard signal into a pulse-width modulated (PWM) signal with which the opening of the proportional valve and hence a fluidic output parameter (e.g. fl ow rate) can be infinitely varied. An internal current control with the duty factor of the PWM signal as manipulated variable ensures that every value of the input signal, irrespective of the thermal condition of the coil, is unambiguously assigned a given value of the effective coil current.

• Microprocessor-controlled electronics

• Switchable standard input signal

• Infinitely variable PWM frequency

• Optional RS232 or RS485 interface

Contact us about this product

BURKERT TYPE 8611 - UNIVERSAL PROCESS CONTROLLER eCONTROL

Thanks to its compact design, the universal 8611 controller is especially designed for compact control system applications. It is compatible and tested with all Burkert proportional valves and sensors and can be connected with every none-Burkert Control valve by standard signal (4-20 mA, 0-10 V or PWM-output). The proportional & Integral (PI) process controller is equipped with many additional functions. The process value feedback can be supplied as one of three analog inputs; a standard signal (4-20 mA/0-10V)), frequency or RTD signal; directly to the universal controller.

• Continuous, 2-point, 3-point and On/Off control

• Ratio control function

• Sensor inputs (4-20 mA, 0-10 V, frequency, RDT)

• Control of proportional, process and motor valves

• Burkert proportional valves and flow meters are memorized

• 1/16 DIN size panel version

Contact us about this product

BURKERT TYPE 8619 - multiCELL MULTIFUNCTION TRANSMITTER/CONTROLLER

The 8619 multifunction transmitter/controller is a microprocessor transmitter/controller for connection of sensors which deliver raw signals for pH, O.R.P. and conductivity and flow via pulses. Type 8619 is the ideal device for measurement and control and as well dosing processes e.g. in applications of water treatment plants (like boiler, cooling tower or reverse osmosis systems) and food and pharmaceutical plants.

• Housing, fastening element / Seal: PPO / Silicone

• Cover, vision panel / Overlay: PC / Silicone rubber

• Back plate / Screws: Stainless steel 304 / Stainless steel A4

• Plug-in connector / Pin: PBT / Copper alloy gold-plated

• Display: LC graphic display, light blue backlit; 128x168 pixels resolution; German, English, French languages

• Keypad: 4 soft keys [F1] [F2] [F3] [F4] for dynamic functions 1 central navigation key

Contact us about this product

BURKERT TYPE TAT002 - DIGITAL CONTROLLER

The digital controllers work on a micro-controller basis and are primarily configured as temperature controllers by their inputs and outputs. A wide range of other applications, such as pressure control or level control, can, however, also be carried out by the units, which have a 4-20 mA; 0-10 V and 0-1 V current interface.

• For all standard temperature sensors

• Parameter strings can be copied

• Simple handling

• 2 rocker switches for setting parameters

Contact us about this product

STATUS INSTRUMENTS DM3400 - SMART DIGITAL INDICATOR

Designed without compromise, the DM3400 series uses leading edge technology to accept all commonly used temperature and process inputs. Engineering units are displayed on a high efficiency daylight readable LED display. The indicators can be used “standalone” or, using the Modbus serial communications “pod” as part of a larger system. The highly innovative case design features option “pods” which can be installed without dismantling or re-calibration. “Pods” include: Relay Output, Isolated 4-20mA Retransmission and RS485 Modbus Communications.

• Galvanically Isolated Input
• Thermocouple or Pt100 Input - DM3410
• Current or Voltage Input - DM3420
• Flexible Configuration using Option “Pods”
• Easily Re-programmed 

Contact us about this product

STATUS INSTRUMENTS DM3600 - INTELLIGIENT DIGITAL INDICATOR WITH TFML

The DM3600 is an intelligent digital panel meter that can accept inputs from a wide variety of sensors and display the signal digitally. In addition, it has the facility to accept up to two options ‘Pods’ which can be either isolated 4-20mA re-transmission or two normally open alarm relays. The DM3600 is available in two models: DM3600U which is a universal input panel indicator and DM3600A which is a universal panel indicator with totaliser functions. The DM3600 supports TFML (Transfer Function Module Library) ie. the ability to download custom functionality by means of standard modules available from the web site. This allows pre-written or custom control functions to be quickly and easily incorporated. 

• Universal input
• Flow Totaliser Functions
• 6 Digit Display
• Relay & Analogue Outputs

Contact us about this product

STATUS INSTRUMENTS DM500 - LOOP POWERED INDICATOR

DM500 is a loop-powered process indicator, designed to be connected in series in a 4-20mA current loop to display digitally the process variable represented by the current flowing. The circular stainless steel housing is available in a choice of depths, permitting the installation of a suitable loop-powered transmitter.

• Large 20mm LCD Display
• Stainless Steel Case
• IP65 Enclosure 

Contact us about this product

STATUS INSTRUMENTS DM600 - BATTERY POWERED INDICATOR

The DM600 series of battery powered indicators accepts either an RTD (DM640P) or a thermocouple (DM640TC) input. Each device shows the temperature on a 4 digit LCD display.

• BATTERY POWERED

• RTD OR TC INPUT OPTIONS

• PUSH BUTTON CONFIGURABLE

• 4 DIGIT DISPLAY

• HOUSING ABS PLASTIC OR STAINLESS STEEL

• SEALED TO IP67

• 10 YEAR WARRANTY

• ATEX APPROVED IN ABS HOUSING 

Contact us about this product

STATUS INSTRUMENTS DM700 - LOOP POWERED INDICATOR

The DM700 series is a family of Loop Powered Indicators which incorporate a high efficiency LED display. ATEX versions are available for use in hazardous areas.

• (4 TO 20) mA LOOP POWERED

• 4 DIGIT LED DISPLAY

• 10 YEAR WARRANTY

• CUSTOM LINEARISATION

• FULLY PROGRAMMABLE BY PUSH BUTTONS

• ATEX APPROVAL 

Contact us about this product