Fine Controls (UK) Ltd

MIDLAND ACS 3000 SERIES - STAINLESS STEEL VOLUME BOOSTER

The Midland ACS 3000 Series is a fully stainless steel volume booster that can substantially increase stroking speeds of large actuators while maintaining normal stable responses. With a 1:1 pressure ratio and supply pressure of up to 150 psig, this unit is suitable for a variety of applications.

• Supply / Output connection: ¼”, ½” or ¾” NPT (F)

• Signal Connection: ¼” NPT (F)

• Supply Pressure: Up to 150 psig (10.3 bar)

• Pressure Ratio: 1:1

• Ambient Temperature: -40˚C to + 70˚C (-40˚F + 160˚F)

• Deadband Width: 1psig (0.7 bar) or 5% of output span, whichever is greater

• Operating Supply Gases: Air, Nitrogen, Methane (Natural Gas)

• Flow Capacity: Cv (In-Out) - 3.5 CV (Out - exhaust) - 2.5

Contact us about this product

MIDLAND ACS MODEL 1500 - STAINLESS STEEL SPOOL VALVE

Midland-ACS offers a wide selection of Stainless Steel spool valves in NACE specification Stainless Steel. Air pilot, Mechanical or manually operated devices in both 3/2 and 5/2 functions are available with in this range making them an ideal solution for most pneumatic system applications.

• Hazardous area solenoids

• Coil with 316 or aluminium housing

• Closed centre

• Atex Certification

• CENELEC approvals

• 1/4"NPT (BSP option available)

Contact us about this product

MIDLAND ACS MODEL 1600 - STAINLESS STEEL SPOOL VALVE

Midland-ACS offers a wide selection of Stainless Steel spool valves in NACE specification Stainless Steel. Air pilot, Mechanical or manually operated devices in both 3/2 and 5/2 functions are available with in this range making them an ideal solution for most pneumatic system applications.

• Hazardous area solenoids

• Coil with 316 or aluminium housing.

• Block before bleed

• 1/2"NPT (BSP option available)

• Atex Certification

Contact us about this product

MIDLAND ACS MODEL 1750 - STAINLESS STEEL POPPET VALVE

This extensive range of Stainless Steel poppet valve is manufactured in sizes from ¼” to 11/2” with BSP or NPT connections. Designed for high flow and suitable for use on most gases including sweet gas (with sour gas option) and some liquids.

• High flow

• Hazardous area solenoids

• Coil with 316 housing

• Atex Certification

• CENELEC - UL approvals

• 1/4" NPT and (BSP)

• Low temperature range 

Contact us about this product

MIDLAND ACS MODEL 1800 - STAINLESS STEEL FLUOSLIDE DIRECTIONAL CONTROL VALVE

A range of heavy duty 4/2 + 4/3 solenoid, pilot manually operated 'Fluoslide' directional control valves in stainless steel for use on gases.

• Heavy duty

• High flow

• Critical applications

• Hazardous area solenoids

• 1/4" NPT (BSP optionavailable)

Contact us about this product

MIDLAND ACS MODEL 1900 - STAINLESS STEEL DIRECT ACTING SOLENOID VALVE

Designed for use in both safe and hazardous area applications these units are manufacture in 316 Stainless Steel with Flourelastomer seals making them suitable for use on various gases as an actuation media. Available in both 3/2 and 5/2 functions with a choice of solenoid or Air pilot operating signals.

• Lightweight

• Manual override

• Reset and latch versions

• EExd IIC T6.

• 316 Stainless steel throughout

• Atex Certification

• 1/4", 3/8", 1/2"NPT (BSP option available)

• Universal operation

Contact us about this product

MIDLAND ACS MODEL 3500 - STAINLESS STEEL FILTER

Clean dry air is critical to ensure a long and reliable life of pneumatic devices & instrumentation. The Midland-ACS Stainless Steel filter range offers an ideal solution for use in corrosive or clean/hygienic area applications. With a 5micron Stainless Steel filter as standard this high flow Stainless Steel filter is available with manual or Automatic drain.

• Large flow paths minimise pressure drop

• 316 Stainless steel throughout

• Large stainless steel element

• 3/4", 1" NPT and BSP 

Contact us about this product

MIDLAND ACS MODEL 3500 - STAINLESS STEEL FILTER REGULATOR

The Midland-ACS range of Stainless Steel Filter Regulators are manufactured to a high standard in 316 Stainless Steel and conform to NACE MR-0175, making this unit ideal for off shore oil & gas duties as well as being widely used through out the pharmaceutical and food & beverage industries.

• 316 Stainless steel throughout

• Large flow paths minimise pressure drop

• Integral mounting holes

• Tagging facility built in

• Filter Unit

• 3/4", 1", NPT (BSP option available)

Contact us about this product

MIDLAND ACS MODEL 3500 - STAINLESS STEEL LUBRICATOR

To compliment this extensive range of Stainless Steel air preparation Midland-ACS offer an lubricator for applications that require lubricated compressed air. With a built in flow sensor to adjust oil supply to meet air flow demand and transparent Acrylic sight glass to indicate oil levels this unit is supplied with ½” ports

• Accurate drip rate adjustment

• Can be filled under pressure

• Transparent sight feed dome.

• Built in flow sensor

• Filter Unit

• 1/2" NPT (BSP option not available)

Contact us about this product

MIDLAND ACS MODEL 3500 - STAINLESS STEEL PRESSURE REGULATOR

These high quality Stainless Steel pressure regulators are suitable for the pressure control of gases, air, sweet and sour gases and compatible liquids. With a rolling diaphragm for precise control and high flow characteristics the 3550 and 3500 series accept a 20bar inlet pressure, with options for 40bar rated versions, and have a wide choice of spring outlet ranges.

• 316 Stainless steel throughout

• Large flow

• High relief flow

• Integral mounting holes

• 3/4", 1", NPT(BSP option available)

• Tagging facility built in

Contact us about this product