Fine Controls (UK) Ltd

JORDAN VALVE JB SERIES - HIGH PRESSURE REGULATOR

The Jordan JB back pressure regulator is designed for gas or liquid service up to 750 psig (52.0 bar). The back pressure regulator controls the inlet pressure. It is used to maintain a pressure in a process, or act in a relief valve capacity. It can be manufactured in a variety of bar-stick materials, and is ideally suited for either corrosive or non-corrosive services. 

• High Pressure Capability - maximum inlet pressure to 750 psig (52 bar); full pressure drop capability

• Barstock Body - can be used in applications that require purity greater than 99.995%

• Low operating torque

• Accurate adjustment

Contact us about this product

JORDAN VALVE JR SERIES - HIGH PRESSURE REGULATOR

The JR Series is a line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for corrosive and specialty gases. Typical applications include gas chromatography and flame ionization detectors, as well as other industrial controls.

• High Pressure Capability - maximum inlet pressure to 3600 psig (248 bar); full pressure drop capability

• Barstock Body - can be used in applications requiring purity greater than 99.995%

• Suitable for corrosive applications

• Low operating torque

• Accurate adjustment

Contact us about this product

JORDAN VALVE JRH SERIES - HIGH PRESSURE REGULATOR

The LowFlow JRH Series line of high pressure regulators have the ability to handle very high pressures and low flows. These valves are typically used in research and sampling systems for corrosive and specialty gases. Typical applications include gas chromatography and flame ionization detectors, as well as other industrial controls.

• High Pressure Capability - maximum inlet pressure to 4000 psig (276 bar); MAX pressure drop 3000 psig

• Barstock Body - can be used in applications requiring purity greater than 99.995%

• Suitable for corrosive applications

• Low operating torque

• Accurate adjustment

Contact us about this product

JORDAN VALVE MK 50 - STANDARD SERVICE BACK PRESSURE REGULATOR

Handles the broadest range of applications including steam, water, oil, gas, air and chemicals.

• Line Sizes: 1/2" through 4”

• Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 2 to 450 psi 

Contact us about this product

JORDAN VALVE MK 53 - BACK PRESSURE DIFFERENTIAL PRESSURE

Maintains a constant differential between the inlet pressure and the dome loading pressure.

• Line Sizes: 1/2" through 2”

• Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 1 to 450 psi 

Contact us about this product

JORDAN VALVE MK 56 - AIR LOADED BACK PRESSURE REGULATOR

Provides accurate back pressure regulation from a remote location. The set point is controlled by adjusting the air pressure that is supplied to the top of the diaphragm.

• Line Sizes: 1/2" through 6”

• Body Materials: Ductile Iron, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 2 to 185 psi 

Contact us about this product

JORDAN VALVE MK 58 - GLOBE STYLE BACK PRESSURE REGULATOR

The MK58 is a back pressure regulator that has an inlet in the side and an outlet on the bottom. It can also operate in a through-flow configuration with the bottom port acting as a bypass.

• Line Sizes: 1/4" through 2”

• Body Materials: Ductile Iron, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 1 to 275 psi 

Contact us about this product

JORDAN VALVE MK 60 - STANDARD SERVICE PRESSURE REGULATOR

Handles the broadest range of applications including steam, water, oil, gas and chemicals.

 • Line Sizes: 1/2” through 4”

 • Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 1 to 450 psi (0,07 to 31,02 bar) 

Contact us about this product

JORDAN VALVE MK 608IS - TANK BLANKETING PRESSURE REGULATOR

A self-contained low pressure gas regulator for use on tank blanketing and other low pressure air and gas applications.

• Line Sizes: 3/4” through 1-1/4”

• Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless Steel

• End Connections: Threaded or Flanged

• Setpoints: 1” WC to 3.5 psi 

Contact us about this product

JORDAN VALVE MK 63 - DIFFERENTIAL PRESSURE REGULATOR

Maintains a constant differential between the outlet pressure and the dome loading pressure.

• Line Sizes:1/2” through 2”

• Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless Steel

• End connections: Threaded or Flanged

 • Setpoints:1 to 450 psi 

Contact us about this product