Fine Controls (UK) Ltd

BURKERT TYPE 8010 - MAGNETIC PADDLE (FLIPPER) FLOW SWITCH

The 8010 is a magnetic paddle flow switch for on/off control. Available with normally open or closed, relays this unit can be fitted to a choice of body materials and sizes.

• On/Off Control
• Relay Output
• Easy Setup 

Contact us about this product

BURKERT TYPE 8030 - FLOW SENSOR

The paddle-wheel flow sensor is specially designed for use in neutral, solid-free liquids. The sensor is made of a compact fitting with integrated paddle-wheel and an electronic-nodule, quickly and easily connected together by a bayonet. The hall-sensor produces a frequency signal proportional to the flow which can easily be transmitted and process.

• Pipe diameter DN 15...50
• Measuring range 0.3...10m/s
• Measuring error
• Output signal Transistor PNP and NPN
• Supply voltage 12...30 VDC
• Enclosure IP 65
• Fluid temperature maximum 0°C … +100°C 

Contact us about this product

BURKERT TYPE 8032 - FLOW SENSOR/SWITCH

This paddle wheel Flow Sensor/Switch is specially designed to establish an ON/OFF Control loop. The switching point can be programmed with the 3 key pads on the display or can optionally be programmed externally from a programmable logic controller over a 4...20 mA loop.

• Pipe diameter DN 15...DN 50
• Measuring range 0.2m/s...10m/s
• Switching accuracy +/-1%
• Repeatability 0.4% o.R.
• Voltage supply 12...30 VDC
• Fluid temperature max. 100°C

Contact us about this product

BURKERT TYPE 8025 - DIGITAL FLOW TRANSMITTER

The paddle-wheel flow transmitter for continuous flow measurement and batch control is specially designed for use in neutral and slightly aggressive, solid-free liquids. The transmitter 8025 is a compact unit with integrated sensor or a remote mounted sensor 8020 with panel or wall mounted transmitter. The transmitter produces 4...20mA standard signal proportional to the flow and provides a freely adjustable pulse output.

• 4...20mA standard output signal
• Pulse output (NPN, PNP or reed)
• Local flow display
• 2 totalizers display
• 2 programmable thresholds 

Contact us about this product

BURKERT TYPE 8035 - BATCH CONTROLLER

The paddle-wheel flow transmitter and batch controller is quickly and easily connected together by a bayonet. The transmitter component converts the measured signal and displays the actual value. Display and menu-guided operating elements allow a customised adjustment of all measuring parameters.

• Pipe diameter DN 15 … 50
• Measuring range 0.3 … 10 m/s
• Measuring error +/-0.5%
• Fluid temperature maximum 0°C … +100°C
• Fitting Brass, ST/ST or Plastic
• Voltage supply 12 .. 30 VDC or 90-240 VAC
• Output signal 4...20 mA
• Relay output 2, freely programmable 

Contact us about this product

BURKERT TYPE 8024 - EASY FLOW INDICATOR

The 8024 paddle wheel flow indicator is used for continuous flow measurement. Available with a choice of display ranges and engineering units making this unit an excellent option to a VA meter.

• Local or remote display
• Choice of body
• Large display
• Alternative to VA meters 

Contact us about this product

BURKERT TYPE 8035 - INLINE FLOW TRANSMITTER

Type 8035 INLINE Flow Transmitter/Dosing Unit consists of a compact body with an integrated paddle wheel (S030) and an electronics module. Boasting an 8 to 50mm orifice range, this unit is ideal for flow measurement of liquids with low solid content. It is available as either a compact version for control cabinet or field monitoring.

• Paddle wheel technology (DN6 to DN65)
• Flow indication including 2 totalisers with optional alarm relays
• 4...20mA and calibrated pulse output
• Available as compact version with options for remote mounting

Contact us about this product

BURKERT TYPE S070 - POSITIVE DISPLACEMENT FLOW FITTING

This positive displacement fitting is specially designed for highly viscous fluids like glue, honey or oil. The connection to the electronic SE30, SE32, SE35 and SE35 batch with hall sensor is done with the “easy to connect” quarter-turn technique.

• Threaded ½” up to 1 ½” (G or NPT)
• Flanged 40mm or 50mm DIN 2501 PN16, Accuracy 1 ½” or 2” ANSI 150 LB
• Accuracy ± 0.5% (of reading)
• Material of wetted parts: Stainless Steel 316/1.4401, PPS, Hastalloy C
• Max. viscosity: 1000 mPa (cP)
• Enclosure IP66 (NEMA 6)
• Fluid temperature (max) 120°C (248°F) 

Contact us about this product

BURKERT TYPE 8070 - POSITIVE DISPLACEMENT FLOW SENSOR

The positive displacement flow sensor for continuous flow measurement is especially designed for use in highly viscous fluid like glue, honey or oil. The sensor is made up of a compact fitting (S070) with integrated oval rotor and an electronic module (SE30) with pulse signal (Hall transducer), quickly and easily connected together by a Quarter-Turn. The Bürkert designed fitting system ensures simple installation of the sensors into all pipes from DN 15 to 100.

• High accuracy

• Medium with high viscosity

• Mounting and dismounting of the sensor head by a quarter-turn

• Connection to Bürkert devices in remote versions

Contact us about this product

BURKERT TYPE 8072 - POSITIVE DISPLACEMENT FLOW SENSOR/SWITCH

This positive displacement flow sensor / switch with display is designed for use in slighly viscous fluid like glue, honey or oil and specially to switch a valve and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the 3-key keypad under the display or optionally from an external source over a 4-20 mA loop. The 8072 is proposed with On/Off output, or with external setpoints and/or process value outputs.

• Indication, monitoring, transmitting and On/Off control in one device

• Programmable outputs (transistor or relay)

• Automatic-calibration: Teach-In

• Communication - external setpoints and process value (4-20 mA)

Contact us about this product