BURKERT TYPE 8045 - ELECTROMAGNETIC FLOW METER

The 8045 Magmeter is an insertion flow meter for pipe sizes DN15-DN400. Typical applications are liquids having a conductivity > 20 uS. With sensor bodies in Brass, st/st, PVDF, PVC and PP

• Measuring range 0.05 - 10 m/s
• Repeatability =/-0.25% o.R.
• Display 8-digit LC-display
• Fluid conductivity > 20 uS
• Fluid temperature maximum 0 to 80°C
• Sensor material Body in PVDF electrodes Stainless Steel 

Contact us about this product

BURKERT TYPE 8055 - ELECTROMAGNETIC FLOW METER

This full bore magmeter with large graphic display is designed for applications with a minimum conductivity of 5uS/cm. Type 8055 can be programmed locally with 3 key pads or by computer with a serial interface RS485.

• Pipe diameter DN 3 up to DN 100
• Measuring range 0...10 l/h, 0...280 m3/h
• Accuracy +/- 0.2% (or range)
• Process connection DIN 11851 and Tri-Clamp, Threaded ISO 228-1 and NPT, Flanged DIN 2501, ANSI 150 RF
• Body materials: Stainless steel 304 - 1.4301, Carbon Steel
• Lining material PTFE or PP
• Voltage supply 90-265 VAC 

Contact us about this product

BURKERT TYPE 8041 - INSERTION MAGMETER

The flow meter 8041 has been designed for pipes with diameters ranging from DN 6 to DN 400 and liquids having a conductivity > 20 μS/cm. The transmitter is a magmeter made up of an electronic module and a stainless steel sensor. It is fitted with a 4-20 mA output, a pulse rate PLC output and a relay output.

• Working as a transmitter and/or as an ON/OFF controller

• Automatic calibration of full scale: TEACH-IN

• Clean in place (CIP)

• FDA approved

Contact us about this product