Looking for a specific part?
- 2 Way Solenoid Valves ×
- 3 Way Solenoid Valves ×
- Pneumatic Solenoid Valves ×
- Hazardous Area Solenoid Valves ×
- High Pressure Solenoid Valves ×
- Gas Approved Solenoid Valves ×
- Cryogenic Solenoid Valves ×
- Stainless Steel Solenoid Valves ×
- Plastic Solenoid Valves ×
- Pilot Solenoid Valves ×
- Proportional Solenoid Valves ×
Solenoid Valves
Orifice Size: DN13 - DN50 Body Material: Brass or Stainless Steel on request Seal Material: NBR, EPDM, FKM Media Temperature: Up to 120C WRAS Approved Materials
Port size 1/2" - 2" Pressure range 0-16 bar, operates with zero differential pressure Temperature media ranges covering -30°C to +120°C Body material Brass or Stainless Steel, Seal material NBR, FKM, EPDM Options -.The standard brass housing satisfies all European drinking water requirements, WRAS Approved Materials on request
Port size 1/8' - 1/4', Pressure range 0-10 bar, Body material Brass + st/st, Seal material FPM.
Port Connection: G1/8, G1/4, G3/8, sub-base Body Material: Brass & Stainless Steel Seal Material: FKM, PTFE/Graphite & EPDM Pressure: 0 - 25 Bar Media temprature ranges covering '"10°C + 180°C
Port connection 1/4' and NAMUR flange, Flow rate 900 (I/min), Valve body Polyamide (PA), With NAMUR adapter plate.
Port size 1/2' - 1', Pressure range 1-50 bar, Temperature media -10°C to +90°C, Ambient temperature +55°C, max, Body material Brass, Seal material PTFE (O-rings NBR), Un-effected by pressure surges.
Pressure Range: 0.2-10 bar, max, Body material: Brass or St/St, Seal material: NBR, EPDM or Viton fluoroelastomers, Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard.
Port Connection: G 1/2, G 3/4, G 1. Body Material: Brass, grey cast iron, Seal Material: PTFE/graphite, Max Pressure: 12 Bar, Maximum Temperature 180°C.
Pressure range 0-10 bar, Temperature media -10°C to +/- 100°C, Banjo bolt Brass, nickel plated, Seal material FPM.
Compact Size, Brass or st/st, Manual Override , 1/8 or sub base mounted, 0-10bar.
Port connections G
Port Connection: G 1/4, G 3/8, G 1/2. Body Material: Stainless steel, brass and stainless steel, nickel-plated. Seal Material: PEEK/FKM; PCTFE/FKM; PTFE/FKM. Max Pressure: 250 Bar. For high pressures. servo-assisted
Flow rate 900 (I/min), Pressure range 1-10 bar, Manual override, 1/4 Ported.
Fully compatible with Rockwell Point I/O System, Combination of Fieldbus, pilot valves and I/O modules, Compact design, High flow rate Fully compatible with Rockwell Point I/O System, Combination Fieldbus, pilot valves and I/O modules, High flow rate
Pressure Range: 0-10 bar, max. Temperature media: -40°C +180°C (seal PTFE), Body material: Brass or St/St, Seal material: NBR, PTFE, Fluid temperature up to +180°C.
Pressure Range: 0-10 bar, max. Temperature media: -10°C to +100°C, Body material: Brass or St/St, Seal material: FPM.
Port size 1/2' - 2', Pressure range 0.2-16 bar, Temperature media -10°C to +90C, Body material Brass, Seal material NBR, Options - Manual override & Explosion Protection Ex to Eurostandard.
Port Connection: G 1/4, G 3/8, G 1/2. Body Material: Brass with stainless steel seat 1.4305 or stainless steel body 1.4581. Seal Material: FKM, PTFE (others on request). Max Pressure: 100 Bar. Maximum Temperature 180°C.
Body-Brass/stainless steel. Ports
For high flow rates with low inlet pressure. Direct-acting, normally closed. 0 - 0.7 bar1). DN 8 - 12 mm. 1/2' and 3/4'.
Port Connection: G 1/4. Body Material: Stainless steel 1.4401. Seal Material: Stainless steel/PCTFE. Max Pressure: 250 Bar. Direct-acting, normally closed and normally open. Electrical connection cable plug Form A. Also available with ATEX approval.
Ports: 3/8' to 1'. Body Material: Brass, stainless steel. Seal Material: FKM, others on request. Max P: 10 Bar. Control valve for continuous control of liquids. Low hysteresis and high repeatability. Control with PWM signal.
Ports: G 3/8 to G 1 Body: Brass/Stainless Seals: FKM, others on request Max P: 10 Bar Piston-operated valve with pressure relief Switches without differential pressure For neutral media and steam Max temp+160°C
Fully compatible with Phoenix Inline System, Combination of Fieldbus, pilot valves and I/O modules, High flexibility, Compact design, High flow rate.
Press. 0 - 10 bar & Vaccum Ports G1/8' - G1/4', Voltage: 24, 110, 230 V/UC Duty cycle 100% continuously rated IP65 EEx m II T4 with moulded cable & EEx me II T4 with terminal box
Threaded port -
Ports
DN 8 & 9 Ports 1/4' BSP or NPT. Body Polyamide. Seals- NBR, NBR and PUR. Electrical connection With cable (3m length). Volts 24, 110, & 230 V/UC. Duty cycle 100% continuously rated. IP65. II 2G EEx m II T 5 PTB 00 ATEX 2129X II 2DIP 65T 100°C.
Electrical 3mt moulded cable or terminal box. Port connections Threaded port
Ports port