Fine Controls (UK) Ltd

BURKERT BANJO PILOT BURKERT VALVES

The banjo valve types are pneumatic single pilot valves designed for a quick mounting onto pneumatic actuators eg. process. For Neutral gases, compressed air.

• Pressure range 0-10 bar
• Temperature media –10°C … +/- 100°C
• Banjo bolt Brass, nickel plated
• Seal material FPM 

Contact us about this product

BURKERT BANJO PILOT VALVES

The banjo valve types are pneumatic single pilot valves designed for a quick mounting onto pneumatic actuators eg. process. For neutral gases and/or compressed air.

• Pressure range 0-10 bar
• Temperature media –10°C … +/- 100°C
• Banjo bolt Brass, nickel plated
• Seal material FPM 

Contact us about this product

BURKERT TYPE 1094 - ELECTRONIC CONTROLLER FOR VAPOUR RECOVERY

When a vehicle is filled with petrol, the petrol flowing into the tank displaces an equal volume of petrol vapour out of the tank. To prevent this petrol vapour escaping into the atmosphere, it must be siphoned off. In the solution offered by Bürkert this vapour extraction is achieved by applying a vacuum via an upstream proportional valve in the petrol pump reservoir tank. A suction pump transports the petrol vapour out of the vehicle tank and compresses it in the petrol pump feed tank. To prevent an overpressure in the feeder tank, the volume of petrol drawn and the sucked back petrol vapour must be balanced. The petrol quantity dispensed into the vehicle tank is measured using the calibrated piston meter of the petrol pump, the output signal of which is converted by a petrol pump computer into pulsed signals that are transmitted to the control unit. The control unit is fitted with a (SUB-D) port so that it can communicate (calibration, measurements) with the manual control unit.

• Input fuel impulse

• Input diesel detection

• PWM-outputs for control of proportional valve

Contact us about this product

BURKERT TYPE 2000 - 2/2 WAY PROCESS VALVE NORMALLY CLOSED

Externally piloted angle-seat valve. With self-adjusting packing glands, intermediate relief and wiper. The angle-seat construction of the body makes possible extremely high flow rates, particularly in comparison to conventional globe valves.

• Port size 1/2” - 2 1/2”
• Pressure range 0-16 bar
• Temperature media –10°C … + 180°C
• Body material Gunmetal, Stainless Steel
• Options: Double-acting actuator, Weld-end connection, Electrical position feedback & Manual override 

Contact us about this product

BURKERT TYPE 2000 - 2/2 WAY PROCESS VALVE NORMALLY CLOSED WATERHAMMER FREE

Externally piloted angle-seat valve. With self-adjusting packing glands, intermediate relief and wiper. The angle-seat construction of the body makes possible extremely high flow rates, particularly in comparison to conventional globe valves.

• Port size 1/2”
• Pressure range 0-16 bar
• Temperature media –10°C … + 180°C
• Body material Gunmetal, Stainless Steel
• Double-acting actuator, Weld-end, Tri-clamp connection, Electrical position feedback & Manual override 

Contact us about this product

BURKERT TYPE 2002 - 3/2 WAY PROCESS VALVE COMPACT VALVE

The 2002 is a pneumatically operated 3/2 Piston Valve for high flow and steam duty up to 180°C. With port sizes up to DN50, this unit will operate in a choice of functions for one unit. Supplied in Gunmetal.

• Port Connection: G 1/2, G 3/4, G 1, G 1 1/4, G 1 1/2, G 2

• Body Material: Gunmetal

• Seal Material: PTFE

Contact us about this product

BURKERT TYPE 2012 - 2/2 WAY FLANGED GLOBE PROCESS VALVE

The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way valve body. The actuator is made of PA or, for special operating conditions, PPS. The reliable self-adjusting packing gland provides high sealing integrity. These maintenance free and robust valves can be retro-fitted with a comprehensive range of accessories for position indication, stroke limitation or manual override.

• Port Connection: Flange

• Body Material: Cast stainless steel 316L

• Seal Material: PTFE (NBR, FKM and EPDM on request)

• Max Pressure: 16 Bar

• Compact globe valve version

• Available with flow direction below and above seat

Contact us about this product

BURKERT TYPE 2012 - 2/2 WAY GLOBE PROCESS VALVE

The 2012 is a 2 way air operated globe valve supplied in st/st with flanged ports. In sizes from DN15 - DN 65 this unit will operate up to 180°C.

• Port Connection: Flange

• Body Material: Cast stainless steel 316L

• Seal Material: PTFE (NBR, FKM and EPDM on request)

Contact us about this product

BURKERT TYPE 2030 - 2/2 WAY PLASTIC BODIED DIAPHRAGM VALVE

Pilot controlled diaphragm valve with piston actuator and diaphragm seal. As standard, actuator from PA. The flow optimised and zero dead volume valve body makes high flow rates possible.

• Port Connection: DN 15-50: True union and spigot connections

              DN 65: Loose flanges

                              DN 80-100: Fixed flanges

• Body Material: PVC-U, PP, PVDF

• Seal Material: EPDM, PTFE/EPDM

• Max Pressure: 10 Bar

• Applications with aggressive media

• Flow-optimised body with zero dead volume

• Self-draining installation possible

• Removable radial true union, spigot and flange connections

Contact us about this product

BURKERT TYPE 2031 - 2/2 WAY PROCESS VALVE NORMALLY CLOSED

This externally piloted diaphragm valve is an alternative to ball valves. The diaphragm between the actuator and body hermetically isolates the fluid from the actuator.

• Port size 1/4” - 2”
• Pressure range 0-10 bar
• Temperature media –10°C … + 140°C
• Body material Stainless steel

Contact us about this product